Counting matching models…
This model will NOT work with the new MK4S, XL (09/2024 onward) and CORE One injection molded parts! The new reworked model for the MK4S, XL (09/2024 onward) and CORE One injection molded parts can be found here:…
Complete rework of my original Prusa MK4 / XL xLCD Knob Beauty Ring to work with the new injection molded parts from the MK4S, XL from 09/2024 onward, CORE One and CORE One L. Printed in Prusament PETG Prusa Orange 0.1 IS Fast Detail
If you're the owner of the MK4 with the original enclosure and with the newer version of the xLCD mounted outside, you probably stumble across a problem when upgrading to MK4S. Within chapter 3 of the upgrade manual it is described how to…
I really liked the look of vojtz's flat xLCD cover , and printed it (or rather, the labeled remix by Habony Norbert ) for my MK4. However, I ran into some issues. The screen didn't fit into the hole without filing, the screw hole pattern…
I really liked the cover and after I have upgraded my trusted MK4 printer to MK4S I have found my old cover won't fit. Instead of redesigning the wheel I have just taken the original design and changed the size to fit my new printer…
With the original XLCD holder and the display cover in place, the door cannot be opened. In my models you will find a remixed holder with which the door can be opened even with the protective cover in place.…
added new Version: 02_Protector-USB_xLCD-MK4 recommended Material: Prusament PETG Jet Black recommended Layer Hight: 0.2mm Supports needed: No additional parts required: No
Update: New version added, see updated text below. The injection molded xLCD case that comes with the MK4S looks really great. Unfortunately, if you want to mount it on the outside of the enclosure, you have to remove the back plate to be…
Prusa MK4S xLCD display cover protector Ochranný kryt je na vstrekovaný kryt displeja MK4S The protective cover is for the injected display cover MK4S
As Eric said: This is a simple cover for behind the xLCD screen of your MK4 printer. However, the main model has one major flaw, which is the off-center alignment as the xLCD is not mounted symmetrically. With this remix I adjusted the…
With the original XLCD holder and the display cover in place, the door cannot be opened. In my models you will find a remixed holder with which the door can be opened even with the protective cover in place.…
Contains single STL Files and Project Files for MMU and Manual Filament change. In my experience it turns out better if you do the delicate, inlayes and text at first, even if it is a small part of the model, and print the rest of the part.
*** Update September 2024: Added an adapted middle piece that fits the new MK4S cover, that has slightly different dimensions vs. the MK4. *** Update July 2024: I added a remix where the center piece accepts th flush xLCD cover by…
A simple and fast Solution for everyone, whose Desk or Rack is too small to reflect the RGB Status LED underneath the xLCD on the XL or the MK4. For assembly you can use the original two screws for fixation of the xLCD circuit board.…
Alternative xLCD cover with improved looks. Enables to reach the corner parts of the display more easily for better touchscreen experience. There were several xLCD versions shipped with the printers. Mainly, a bolt pattern differs. Check…
EDIT: added STEP file of main part for remixes I kept thinking I was missing a back cover on the xLCD to make it look better, handle better and protect it at the same time...so I made it to look like a part straight from the Prusa MK4 kit…
Für die Montage des xLCD (neuen Version) auf der Außenseite des original Prusa Enclosures ist ein Adapter notwendig da sich ansonsten die Türen nicht schließen lassen. Prusa stellt Adapter zum Download zur Verfügung ( Enclosure Printable…
Original Prusa CORE ONE and CORE ONE L xLCD Status LED Diffuser (xLCD Type A and B) News 11. August 2026: Thanks to the user ProtaDec, my attention was drawn to the following finding. The description was adjusted accordingly. version R1…
Slight modifications of the design to have an orange colored top and base. The change colors layouts : 0mm : Orange 2mm : Black 16mm : Orange
A mount for installing a Prusa i3 MK4 xLCD outside a LACK enclosure the xLCD Supports can be found here: xLCD supports https://www.printables.com/model/709669-prusa-lack-enclosure-external-xlcd-mount-mk4-suppo Description: with the change…
The adapters that are available are a disaster. Maybe on purpose to stretch our creativity and strength and create something nice for the community. So here I bring a nice holder that will certainly not offend anyone. All fasteners are…
*** Update September 2024: Added an adapted middle piece that fits the new MK4S cover, that has slightly different dimensions vs. the MK4.*** *** Update July 2024: I added a remix where the center piece accepts the flush xLCD cover by…
2024-12-09: Model updated. In Step 23, MK4S xLCD adapters preparation , the M3x12sT screws cannot fit through the holes. These holes are enlarged to 7mm diameter so the screws are able to fit. To enlarge the hole, a negative volume…
To ensure long‑term protection of the display and prevent dust, scratches, and other environmental contaminants from compromising its clarity, it is advisable to print and install a dedicated protective cover. This accessory is…
The standard LCD cover and brackets that are for the MK4 and Original Prusa Enclosure stick out a bit farther that they really need to, so I designed this alternative. No brackets are needed with this design, the cover just mounts…
A mount for installing a Prusa i3 MK4 xLCD outside a LACK enclosure the mount can be found here: mount Description: with the change to the new MK4 from my MK3S i needed an new external mount for the xLCD. before, I had the mount for the…
This remixed xLCD cover is best printed with 5 x 0.25 tools to ensure the logos are as sharp as possible, I have also enabled PETG supports on tool 6 with a 0.4 CHT tool. This has been tested on the R3 xLCD.
Works with the Status LED Diffuser https://www.printables.com/model/1343257-original-prusa-core-one-xlcd-status-led-diffuser-x
Owners, upgrading to the MK4S within the original Prusa enclosure need an adapter to mount the new version of the xLCD (version A) on the front. The new housing of the xLCD (2 moulded parts) does not fit on the enclosure without blocking…
Designed for original XLCD injection molded cover MK4s Frame_v1_1-2-1-2mm Print Petg Prusament 0,1 fast detail, 3 perimeter print Frame_v2_1-1-1-1mm Print Petg Prusament 0,1 fast detail, 3 perimeter print I used Mamumu glue for gluing, it…
While being unable to wait for my Founders Edition Core ONE upgrade to arrive, I whipped up this new xLCD cover. The print requires 6 colors. I recommend single perimeter on the first layer, and on the modifiers, monotonic lines for…
I took over the original stl from Prusa and added colors for the MMU like Alego did. But I preferred to keep the design of the MK3 for the letters (using bridges to make a colorful background). To do this, I inserted colored plates inside…
Oriented facedown when loaded (correct for printing). G-code file is for .2lh Quality setting on the MK4 with using Prusament PLA.
I had printed the @perform3d version on my Prusa MK4 and XL and I really loved the very bright rendering. I then changed my MK4 to MK4S and printed the version of @hachleitner_1769169 which fits perfectly on the MK4S, but I found that the…
I recently upgraded my Mk4 to Mk4S. As several people mentioned in the comments, an enclosure complicates things, especially mounting the xLCD. To Prusa's credit, there are adapters to mount the injection-moulded xLCD case in the…
Prusa's first release (R1) of the printable MK4 xLCD cover had engravings to make it look similar to the UV-printed version supplied with the printer/kit. At the time of writing, the R2 and R3 releases do not have these engravings. I used…
This ring takes 20 minutes to print and the wipe tower is 6x as large as the ring itself, but it sure is pretty! Did it mainly because I could (plus I wanted to test my new bufferless spool setup with the MMU3). Printed in eSUN ePLA…
Hello there, I've designed a bumper for the xLCD display outside the Prusa original enclosure. I'm having issues with my vacuum robot, as it keeps colliding with and damaging the xLCD display whenever it moves in that area (normally, the…
Hello, The new PRUSA parts are made of injected plastic. Here are xLCD brackets to fix the screen on the Bear MK4S frame For each part use 1 M3x10 screw and 1 M3nS nut Happy printing :)
Print Prusamanent Galaxy Black 0,2mm structural infil 20% pattern gyroid bridges fan speed 70% Be careful with the cables when assembling. I did the disassembly and assembly with the printer on its side, I did not remove the metal display…
If you are using the stl, simply load it into the slicer and split it into parts, after that just set a color for each part, no support needed, printed in 0.2mm layer height in petg black with white pla and red pla
This has a cut out on the right side so it doesn't interfere with the PE cable when installing. Prusa calls the xLCD with the PE cable located there the “newer” version.
Some have already downloaded my model of the xLCD back cover, which PRUSA does not supply as standard with their MK4 printer. If you don't have it yet, check it out and try it.…
Flat xLCD Screen Cover A custom-designed accessory for your Flat xLCD display cover . This cover is specifically engineered to reduce screen brightness in low-light environments, making it ideal for nighttime use or dark rooms where the…
English (Translated with DeepL.com): The model has two storage trays to the right and left of the display to protect the display and to store small parts outside the housing. At the same time, the USB stick is protected against accidental…
I wanted better clearance in my enclosure (Ikea Platsa), so I shortened the supports for the xLCD by 10mm. The hole geometry for the square nut should be identical to the original, so you can use the exact same hardware. Assembles and…
This is an adapter that allows you to mount the MK4S xLCD to the outside of the enclosure. and usb protect box.
Added switches to control the chamber lights but could be used for other things. Switch I used. https://www.jaycar.com.au/spst-ultra-mini-rocker-switch/p/SK0975
With this bracket you can install the printer display outside the Lack enclosure similar to the original Prusa Enclosure.
Better is PETG. Printed with Prusament PETG Prusa Galaxy Black and Prusament PETG Prusa Orange on Satin Powder-coated Steel Sheet. The size is adjusted to my MK4S, the ring can be inserted tightly (its position can be adjusted - relative…
The text heights are adjusted for printing at 0.15mm increments with a 0.2mm first layer —standard on the basic MK4 profiles. Personally, I printed my covers with a 0.25mm nozzle purely for maximum detail on the text (I’ve added photos to…
My printer cabinet is missing a little depth for the new MK4. I have changed the angle of the LCD holder and reach 25mm more space. The MK4 stands on a stone plate, so it doesn't matter that the LCD now looks out down the printer.…
MK3.5S / MK3.9 / MK4 / MK4S external display support IKEA Lack Enclosure Especially designed to detach the xLCD and use it ina stand alone configuration. It fits to the original screws hole, to ensure perfect compatibility with no…
xLCD cover with Original Prusa MK4S logo. Split to parts in your slicer and add different colors to the parts.
I designed this little guard/support because I felt that the USB and/or xLCD was very vulnerable to damage if the USB were bumped. I didn't want any of the designs that surround the xLCD as mine sits within the bench top and thus…
I put my MK4 on a shelf, so high up that the LCD cover obscures the temperature readouts in the footer on the screen. I hacked this remix together in lisscad to solve that problem. Non-printed parts needed for assembly: 2 × M3 square nuts…
I modified the original file as it was designed for the MK4 using ver R2 XLCD supports. It appears the XLCD design also changed as the grounding lead on the XLCD moved from the bottom to top on the current production models. Ver A and Ver…
Remove 2 front screws. From back LCD are 4 screws. Remove them all. From bottom of Prusa XL printer, unclip this red marked part and blue marked flex part. Blue marked flex part is necessary to cut by 20mm. Now just put new printer…
Some time ago I have remixed the MK4 cover to fit the MK4S updated screen, this cover replaces the MK4S to "Core One", otherwise the covers are completely interchangeable. This is for the same reason as the original, keep the dust out and…
Version avec ajout texte multicouleur et modification pour un emboitement sans jeu avec l'écran XLCD
This is an alternative Quick Release for the MK4's xLCD in combination with the Original Prusa Enclosure. It is a remix of an idea originally posted in the form by the user @ssmith . When installing an MK4 printer in an Original Prusa…
Introduction/Credits I had been using fasteddy's Prusa LACK Enclosure External LCD Mount (MK2/MK3) for years with my MK3 and really liked how it attached and positioned the LCD outside of the enclosure, but when I recently upgraded my…
I really liked the USB support for MK4S, however I havent found the proper design for Core One that is mounted using screws - so I made one myself. This version of the USB protector uses the LCD mounting points and is to be inserted…
print without supports, for mounts, you can use the original ones by Peeves https://www.printables.com/model/792929-back-cover-for-prusa-xlcd-now-with-new-look or if you are want to have angle adjustable mounts where you can use the xLCD…
I really liked the knurled knob look, but thought it needed a little more “bling” to help stand out, so I borrowed the inspiration from the Improved Knurly LCD Knobs for Mk4, XL, Mk3S(+), and Mini(+) by fuchsr and added an accent ring to…
Ich habe 2 Schalter hinzugefügt, damit man nicht immer hinter den Drucker greifen muss, und ihn aus- oder einzuschalten. Zusätzlich gibt es noch einen Schalter, mit dem die Beleuchtung geschalten werden kann. Diese Schalter habe ich…
I was searching for an adjustable mount for the MK4 xLCD which I can mount on top or front of my own printer enclosure. After not finding a working solution I ended up by creation one. The Hinge is inspired by the mechanism used by…
This model is a remix of the original Prusa Research MK4S display adapter, designed specifically for setups where the entire enclosure is elevated . The xLCD display mounts exactly as in the original design, but everything below the…
Really like the flat xLCD cover here: NEW LCD cover for Prusa XL, MK4, MK3.9, MK3.5 best for touch by vojtz. | Download free STL model | Printables.com Remixed the display housing to be compatible with the xLCD cover. Main differences…
Put together a front panel for the MK4 to work on your PrusaBox modular front panel. With this one you should be able to just replace your current MK3/S/+ panel and still use the USB. I did not want to have to change my entire mod panel,…
I needed a xlcd cover to fit my hyper pixel setup and the injection molded cover did not work/fit. So I remixed the R3 cover with the flat design to print one that would fit. All of this was done in purse slicer. If some knows CAD they…
This cover is designed for printed xLCD covers of the MK3-4 series. It is not designed for the new injection molded xLCD cover MK4S. For the MK4S model, there is a cross on this link in my profile.…
If you decide to buy only the functional parts for of the MK4 to MK4S upgrade separately instead of buying the upgrade kit, you can print this display case and get similar look as the Prusa MK4S XLCD cover has.
Sept 23 update notes. Sept 21 2024 updated xlcd-v3-bumperback to xlcd-v3-bumperback-B Removed extra hole and better fit slots for cables. ----- An ABS back cover was added for the MK4S. It mounts to the printer but not the enclosure.…
I received my MK4S upgrade bundle this week and was disappointed that there was no back cover included. So I searched for existing models for it and only found some for the newer version A of the xLCD (why is version B the older one and…
First of all, thanks to vojtz. for the model. A remix for the MK3.5. An MMU is required for printing. I got the best results with a 0.25 mm nozzle. The printing time on the MK3.5 with a layer height of 0.15mm and just under 3 hours is…
Remix of DELACK front LCD skirt wall that fits the "3x12sT" special screws. Main changes are the enlarged screw holes in the back to fit the special screws head used on the MK4S xLCD assembly. Use print settings as suggested by 3dsourcerer.
I liked the idea of printing a front cover for my printer, but I have moved my xLCD to outside of my enclosure. So I remixed the front cover from AngryWookiee and filled in the spot where the xLCD would be. Printed with the 0.20mm SPEED…
On the Original Prusa enclosure there is an unsightly gap behind the xLCD (MK4). The cover closes the gap and improves the appearance, also nothing can fall in between and damage the open xLCD electronic board. Printed with PETG / 0.2…
Thinner 5mm Diffuser
The original external xLCD can't be easily mounted on a lack enclosure so I made a remix for it.
I had a cover display from user @Unismo on my MK3S+ printer. After upgrading to MK4 and MMU3, I wanted to have a similar display again. So here it is. The model is for both R2 (Compatible with xLCD v27 or older (check the PCB)) and R3…
XLCD cover that prevents an accidental reset by children or pets. Check your board version prior to printing. For XLCD boards 27 or higher print the R3 remix, for boards 26 and lower print the R2 remix. Can be printed with manual filament…
Print xLCD_Diffusor with a transparent filament and insert it in the cover. Optional: there is a xLCD_Screen to prevent light leaks.
When trying to mount the original injection-molded housing of the MK4S xLCD to the original prusa enclosure there are several issues: the holes for the screws do not align the position is to high, the xLCD would block the doors. the…
This model allows you to mount the xLCD screen using the existing mounting arms from the Mk4 Printer parts to the front of the LACK enclosure while maintaining access to drawers under the table top or if you have the Lack enclosure…
Print the diffuser in something translucent. I used Overture Clear PETG. Print the frame in the same color as your supports. I used black.
My Prusa Enclosure stands on a shallow desk and the xLCD is in real danger of being bumped so I designed this to protect the xLCD and tuck away its cable. Print with supports (Two small bolt holes) at 0.2mm and remove the two front and…
A customizable xLCD mount for both Core One+ and Core One+ L printers. It can be printed on both as well, you just need to rotate the mount to fit the bed of the Core One+. It can be configured in multiple ways: Allow the install of a USB…
My printer enclosure is such that I access the printer from the right side, so I have moved the xLCD to the right. This kit includes mounting clips for the xLCD brackets, flat cable clips to help route the ribbon cable along the printer's…
I really like the flush xLCD cover that have recently been published. The one by firetech is slightly wider than the original, does not need the “external” light bar and so it does not fit my fender pieces. So I made a new center piece…
With the original XLCD holder and the display cover in place, the door cannot be opened. In my models you will find a remixed holder with which the door can be opened even with the protective cover in place.…
I always found the button on the MK3S practical, as it could be operated with one finger. I wanted to have that again with the MK4S. Now you can have it with the retro styled knob for xLCD. With the xLCD, however, you need a little more…
Zero degree display mounts for Mk4
I printed this on my Prusa XL with 0.25mm nozzle. You can use larger nozzles for a lower resolution. I just wanted crisp text. You need two M3 heat set inserts, 6mm long. Set them with a soldering iron. Then bolt onto enclosure.
Rozšíření o otvor na vypínač napájení (19,5mm x 12,9mm) / Extension with power switch hole (19.5mm x 12.9mm)
Um eine bessere und stabiler Verbindung zum Rahmen zu haben wurden die Vierkantmuttern ersetzt durch Ruthex RX_M3x5,7. Sämtliche Abmessungen sind unverändert und Original. Es sind RX_M3x5,7 oder RX_M3Sx4,0 möglich. Die Original Schrauben…
Printed in prusament petg. Ensure you have 3 walls turned on for the small contact that the square nuts get to be fully filled. Reuse the same screws from previous mounting location after drilling out holes with a 1/8" bit so the mount…
