MK4S xLCD Vers. A backcover for prusa enclosure with integrated LED diffusor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows to mount the injection-molded MK4S xLCD housing to the original prusa enclosure without blocking the doors.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 30
- Makes
- 1
- Views
- 216
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v3.0
When trying to mount the original injection-molded housing of the MK4S xLCD to the original prusa enclosure there are several issues:
- the holes for the screws do not align
- the position is to high, the xLCD would block the doors.
- the adapters designed by @prusa-research that are included in the ‘enclosure printable parts’ for the MK4 xLCD-housing do not fit the injection-molded cover.
- in case the enclosure is placed at the edge of a table the visibility of the status LEDs is bad as they need a reflective surface in close distance.
While there are various adapters here on printables, from my point of view an adapter for a broken design is not a satisfying solution. I therefore created a new backcover from scratch that nicely fits the front of the injection-molded cover. The distance of the mounts matches the existing holes at the front of the original prusa enclosure.
There are two versions:
- simple backcover, status LEDs illuminate the floor.
- backcover with integrated diffusor to be printed in 2 colors (using e.g. an MMU and transparent filament for the diffusor). Status LEDs are clearly visible.
the backcover fits the xLCD version A. (On the xLCD board version B THE PE connector is in a different position. If your xLCD board is Version B feel free to remix accordingly).
Print upside down, Perimeter 3, 20% infill, support on build-plate only with overhang-threshold 20°, brim enabled (for the main body it may work without brim, but I had trouble with the holders deseparating from the print-sheet when using petg on the textured sheet)
for the diffusor set Perimeter to 6, 100% infill, brim enabled
Updates:
23.11.2024 optimize overhangs for ‘support on buildplate only’