Core One+/L xLCD Extended Mount & USB Extender / Protector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A customizable mount around the xLCD. Fits both Core One+ and Core One+ L. Provides USB extension and protection.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 28
- Makes
- 1
- Views
- 376
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
A customizable xLCD mount for both Core One+ and Core One+ L printers. It can be printed on both as well, you just need to rotate the mount to fit the bed of the Core One+.
It can be configured in multiple ways:
Allow the install of a USB extender, protecting the internal USB from physical damage. Helpful in shared environments, or:
Block the use of the internal USB port with the idea being you'd leave a permanent USB drive inside of the mount. Also helpful for shared environments if the device is only to be accessed via Connect/PrusaLink.
Allows customization and identification of printers in a stylish manner.
This print was designed by myself for the hackerspace Pumping Station: One in Chicago.
You can use PrusaSlicer to customize the mount, such as adding text or logos.
Recommended print settings:
20% infill
PETG or ASA
No supports required, but recommended on the rear where the L shaped hole is
Uses the following parts:
4x M3x10 screws
2 to replace the xLCD mount screws with longer screws
2 to mount the USB cover in place
Optional: USB extender
iGreely USB Extension Cable 2-Pack (1ft/30cm)
Attached files:
GCode files - minimal text, pre-configured
3D files with no text
ZIP files containing PrusaSlicer 3mf projects with sample text and logo applied