fender for the Prusa enclosure + holder for xLCD - MK4 / MK4S
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fender pieces to protect the xLCD mounted to the Original Prusa enclosure + an alternative mount for the xLCD
- Rating
- 4.8 / 5
- Likes
- 61
- Downloads
- 153
- Makes
- 5
- Views
- 2,248
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
*** Update September 2024: Added an adapted middle piece that fits the new MK4S cover, that has slightly different dimensions vs. the MK4.***
*** Update July 2024: I added a remix where the center piece accepts the flush xLCD cover by firetech. Again - mix and match with the verious side pieces.***
*** Update 31. Dec. 2023: I added a version with a hole for a snap-in light switch (21mm diameter) in the left fender piece here (as shown in the makes). You can mix and match pieces with the remix version (long flash drive), of course. ***
*** Update 16. Oct. 2023: I added a remix, that allows users to retain the original Prusa USB stick (flash drive). ***
These three pieces attach to the front of the Original Prusa enclosure and protect the xLCD from any side impact. The middle piece replaces the holding brackets for the MK4's xLCD.
The result is a stylish front bumper that I find to look more attractive than the original mounting of the xLCD.
This design accepts two threaded inserts per piece. No changes in cabling / cable length required. Both the regular door fittings and also the hinge pieces of the folding door variation fit nicely over the xLCD and the center piece. There is also room for light bar extensions on the bottom side of the xLCD. I added a modified light bar that fills the gap nicely.
Note, that I use a short USB stick, the original stick would interfere with the right-side fender piece.
