163 models
I had this AQUAPUR adaptor for quite some time, but doesn't fit on my DREAME XR vacuum cleaner. So I remixed design from 3D Galaxy . I printed in PETG Infill: 30% or 40% Layer Height: 0.20mm Supports: Yes, organic If you like my work…
These are small printable masks of Monomon, Lurien, and Herrah from the game Hollow Knight. They were designed to clip onto straps like those on backpacks. Each mask is a two-piece print. I printed the masks in white and the clips in…
The Dreame comes with more accessories the base station can fit - these screwable holders allows to store all of it.
Upgrade your Mova P10 Pro Ultra with this custom 3D-printed dust bin , designed for enhanced durability and a perfect fit. This innovative bin eliminates the need for disposable bags , offering a more sustainable and cost-effective…
Most Dreame vacuum cleaner come with 4-6 accessories. To tide up the cabinet I designed a 3 slot wall mount. This can mounted using screws or double sided tape. It can be extended to get 6 slots. Its possible to place it next to each…
The Xiaomi Dreame D10Plus has an auto-empty base-station which uses one-time use, throwaway dustbags. I didn't like this because it feels wasteful. Instead I designed a re-usable dustbin that slots in a spare HEPA filter from the vacuum…
This is an accessory (additional brushes) etc. holder for the Xiaomi Dreame V9 vaccum cleaner. (It possibly also fits to V9P and V10, but I cannot verify). As I think the original charging cradle does not provide enough slots, I designed…
Part 1 - Stands and Locks. For Part 2 - Rods and Spacers, see: https://www.printables.com/model/328943 These are my improvements for the ingenuous OmniStand v1.36 by Baron Williams - the replacement stands and rods for the FlashForge…
can be printed in PLA or PETG with 0.2mm layer height profile 2 or 3 perimeters. Make sure you use soap for robot cleaners. Follow the instructions in the pictures. I used my finger nail to remove the cap only the first time is difficult.…
“The known is known to few…” Sit down, my children, and listen to a story from an old, old 3D maker, who lived at the time when Makerbot printers were open source and abundant, and Thingiverse was a website made by the people who loved…
Original holder was shitty for our needs so designed version that holds vacuum cleaner hanging in wall. Also designed holders for nozzles for easy access
Deutsche Version Mir waren die drei Messer des Mähroboters sowohl zu wenig als auch zu teuer. Daher habe ich dieses Bauteil entworfen. Nach mehreren Testdrucken ist der Mähteller nun fertig und passt Plug & Play, ganz ohne Anpassungen.…
Part 2 - Rods and Spacers. For Part 1, see: https://www.printables.com/model/328497 These are my improvements for the ingenuous OmniStand v1.36 by Baron Williams - the replacement stands and rods for the FlashForge Dreamer printer. Think…
Since the original docking station doesn't have enough space for all tools supplied with Dreame V12 cordless vacuum, I designed a small wall mounted bracket to hold the extended tube with the multibrush attached to it. Mounting to the…
Upgrade your robot vacuum with this simple but effective 3D printed add-on! This holder was designed to attach easily and carry a small aroma bottle, leaving your home not only clean but also pleasantly scented while the vacuum does its…
My Dreame Vacuum is called Meryl Sweep. What do you want to call your's? Dustbin Timberlake, Dusty Bin, Dirt Vader? My Dreame Vacuum is called Meryl Sweep. What do you want to call your's? The names that I have made so far are below. If…
We use a lot of different filaments when printing with our Flashforge Dreamer machines, and so does you probable, otherwise you wouldn't search for this? I created this holder to help me solve the issue of other filament spools not really…
Multiplicateur d'accessoires pour support mural Dreame V12 ou modèle ultérieur, permet d'ajouter des emplacement supplémentaires de rangement au support original
Dieser Aufsatz passt auf den Geräteabfluss/Anschluss an einem Handelsüblichen Siphon. Der Abflussschlauch vom Dreame, für den Festwasseranschluss, passt exakt in die Öffnung. Mit etwas kraft reindrücken, aber aufpassen das man den…
80mm fan can mount on the outside of the Flashforge Dreamer and can connect to the 100mm vent. Flashforge Dreamerの外側に80㎜ファンを取り付けることができます。 内蔵ファンを取り外し、内側からM4ねじで固定してください。 Print Settings Printer Brand: FlashForge Printer: Dreamer Rafts: No…
Какое то время мучился с этим шарниром. Сначала начали выпадать маленькие внешние заглушки, пытался их клеить и суперклеем и на двухкомпонентный poxipol, всё равно всё вылетало, терлось. В итоге выломались и внутренние части шарнира и…
Needed some additional wallmounts for the accessories. Does klick in, just like the original ones.
Da mir die originalen drei Messer zu wenig waren habe ich diesen Messerteller entworfen. Als Messer finden die gängigen Messer für Husqvarna/Gardena Verwendung. Der Teller hat im komplett bestücktem Zustand ein Gewicht von 116g und ist…
Parabolic antenna reflector for the remote of the potensic dreamer pro. I dont think it works for the potensic dreamer 4k, which uses the phone's wifi. I use sticky spray and aluminum foil as seen in the picture. I reached the 2000m…
The pipe clip is oversize to accommodate a rubber liner to avoid slipping along the pipe.
The wall mount for my Dreame XR has not enough place for all tools ... so I made this Thing here. Hope you like it. It can be mounted upside down, too. Please share a photo of your print! :) P.S.: 30mm between the screw holes Die…
This is a simple accessoires-holder for the Dreame Z30. Screw it under some shelf or something similar.
External spool holder/mount for the FlashForge Dreamer (and Dreamer NX) and Dremel 3D20.The clips will fit in any of the vents on the sides or back and holds just about any spool. I only tested 1Kg spools, but it is plenty strong enough…
Additional Xiaomi dreame broom holder when there is no space to mount it normally
What do Minions dream of? Print these 'Crackers' and find out. Instructions Print these at 0.3 mm layers. The default 'low (faster)' setting in MakerWare works fine. After they're printed, you can crack them open at their belt line. If…
A simple adapter that lets you empty Dreame auto-empty vacuum bags using a normal household vacuum cleaner. Just clip the flat side into the bag’s connector and attach your vacuum to the round port. Turn it on, empty the bag, and reuse…
The lock clip of on of my Dreamy accessories broke, so I designed and printed a replacement part. For better stability I used PETG instead of PLA. Enabled “Support on build plate only” when slicing with PrusaSlicer. I used “0,2mm Quality”…
To protect the robot from damage caused by sharp furniture legs, I designed a protective ring. The ring is sturdy enough to shield the top and slim enough not to interfere with either the laser sensors or the bump sensors. The rear tabs…
This tools storage allow you to store a brush, an empty bag, the cleaning tool and an other place for accessories as the tricut spare brush. To fix it, i used 3M Strips to avoid to drill holes in the vacuum station. Print it upside down…
Unfortunately, most replacement filters are supplied without lids. Here is the replacement for it. Die meisten Ersatzfilter werden leider ohne Deckel geliefert. Hier ist der Ersatz dafür.
This is a simple adapter made for Dreame vaccum cleaner with internal diameter of 30mm. It was made so that my kid's nasal aspirator can be connected to it.
The corners can be either clipped on or secured with M3-0.5 x 20 mm socket head machine screws. I have them secured. If you decide to secure them, you need to buy the screws, but no new screw holes are necessary: the screws will use…
Als Ersatz für beschädigte oder abgerissen Verschlüsse an den Wasserbehältern. Auf der Seite liegend drucken mit Support. As a replacement for damaged or torn seals on the water containers. Print it sideways. Nearly every quality does its…
After buying a replacement, I noticed that the tube breaks at the connection, so I made the attached piece to avoid this breakage in the tube. It is suitable for the dreame v9 -v9p vacuum cleaner and also the xiaomi, check measurements…
Spare part for the Xiaomi vacuum cleaner brush. Drive gear for the HTD belt. I printed with PLA+, I don't know how long it will work ;). It fits tightly onto the axle - requires some persuasion ;)
☁ The Honest Shelf Vol. 64 // "The Dreamer" ☁ Meet your new favorite zen companion—designed to bring a touch of peace and a big smile to your favorite space! 🧘♀✨ I designed "The Dreamer" because I wanted to create more than just a…
Update: Created a holder ring which is easier to apply. You can use your 3d printer pliers to press the rings on the base. --- Hello, I had the problem that the wiper pads on my Dreame L10s Pro would detach from the Velcro holders after a…
FlashForge Dreamer X-axis wire clip. The clip could be held just by pushing it onto the inside rib of the FlashForge Dreamer body, but I felt that since the X-axis motor wires move constantly, the clip deserved a more secure attachment.…
Printed in pla with 50% infill.
Dustbin mod for Dreame D10+. The hole of the original model did not align in my Dreame D10+. I just reprinted the flange and glued it on.
My floor is 12mm higher at the wall side of the base-station. So water stays in the bottom of it. I used some isolation-foam to bring the station into level. The ramp helps the rover to climb the edge. One blank version and a second which…
Long version of the original Dreame nozzle - to fit into my car seat mounting :)
This 3D model represents a fun "pipe dreamer" character inspired by a famous plumber. It comes in a single-color version , so you can enjoy painting it with acrylics, markers, or an airbrush – a great creative activity to do with kids.…
This is a replacement for the 2-in-1 brush nozzle on my Dreame V9
PL Model uchwytu do akcesoriów odkurzacze Dreame Xiaomi T10 20 Kompatybilny z innymi modelami tego producenta Uchwyt do montażu na ścianie / płycie. Odsuniety od ściany w celu łatwego montażu rury z założoną szczotką. Dedykowane miejsce…
A Funnel to fill the Watertank of an Dreame vacuum cleaner robot.
Optimized Ri3del s model for attaching accessories from below. Recommend printing in PETG. If printing in ABS or ASA, you need to compensate for the shrinkage of the material, by enlarging to model to about 100,4%.
I lost the ramp of the base station of our robot vacuum during a move, so I designed a new one. The ramp is split into two parts so it fits on my print plate. I tried to somewhat copy the existing design, but it is not a perfect copy. If…
Same as the original, just with a second hole
I broke the little piece of plastic acting as a cap on the original detergent bottles for my Dreame L10s Ultra, preventing them from being refilled. So I designed this little cap, which allows you to close a detergent bottle that has been…
This adapter allows you to connect a nasal aspirator (Katarek) to a Dreame vacuum cleaner. By default, the aspirator’s tip does not fit because the vacuum cleaner’s opening is too large. WARNING! AdjustThis is an adapter to the vacuum…
This is a remix of https://www.thingiverse.com/thing:441035 but uses 4 MISUMI LMU-N8 bearings instead of the stock ones. This was remixed in tinkercad and has not been tested. X axis belt clamp can be found here…
I made this to lift the lid on my FF Dreamer so the filament would not have to make such a sharp turn at the print head. I used Polycarbonate Clear Plastic Sheet 12" X 18" X 0.0625" (1/16") available from Robosource for the windows so…
Halter für Dreame HairGleam, schrauben sind versenkt in dem Halter. Es werden sehr kleine Schrauben benötigt oder man klebt ihn an. Ich persönlich würde Schrauben empfehlen.
The previous version worked for me for about 2 months. I made a modified project, where the gear wheel is secured with an m4 screw. The gear wheel has a socket for an M4 nut, the screw should be cut to approximately 10 mm, and a slot for…
The front wheel/caster on my Dreame L40 broke in half. Apparently this is somewhat common. After spending 30-45 minutes disassembling it I decided I didn't want to have to do that again if it happened again, so designed this replacement.…
I’ve had problems with my Xiaomi Dreame F9 robot vacuum getting stuck under low furniture like my bookshelf. This bumper is a solution I came up with. It fits snugly on the front brim of the robot and prevents it from going too far under…
Zusatzgewicht für den Dreame A1 und A1pro. Stehend drucken, für unten wird ein kleiner Support benötigt, im inneren geht ohne. Anschließend wird das ganze mit Beton ausgegossen und ins Heck des A1 geschraubt. Bei mir ergab es ein Gewicht…
This is an adapter to mount the Prusa Mini spool holder on my Flashforge Dreamer. I needed a better spool holder for my Dreamer. I wanted something more sturdy than the arms that stick out at a right angle. I was familiar with the spool…
This is a replacement Filter Cap for the Dreame Hepa-Filters used in my V10 Pro. Printed on the Prusa MK3/S+
(version Française plus loin) Dreame R20's dust bin cover hinges are rather small and can break off easily. This is a replacement design for the hole cover assembly, except the exterior gasket. If your cover is broken, just take out the…
Reinforced Spare Button (Clip) for Xiaomi Dreame Vacuum Cleaners (V9 / V10 / V12 etc.) This reinforced, support-free spare clip is designed for FDM 3D printers and fits Xiaomi Dreame cordless vacuum models (V9, V10, V12 and others). Its…
Battery charge base for Dreame T20 pro vacuum cleaner , to charge battery in a standalone configuration (without the original stand, that was too big for me). I create a pre-supported version with small wall under the 4 clips, so you need…
Made a single or double wall mount for attachments for cordless vacuum cleaner Dreame U20 You can turn either wall mount facing either way if you wish to have attachments be top or bottom mounted Both mounts are designed to be printed…
Caps for the cliff sensors on the Dreame D10 robot vacuum cleaner. Should work on the L10 and L10s models aswell. Update: Redesigned the caps for the front sensors.
Orientation: Print in the orientation shown in the image below for the best results and to maintain the snap-fit geometry. Supports: This model can be printed support-free , but requires a 10-15 mm brim for bed adhesion. Walls/Perimeters:…
Reduce the wide nozzle of your dreame vacuum cleaner from 17mm gap down to 9mm. With less motor power it get a way more suction power. It has a very tight fit so no need to glue it. Works also very well with the brushes moved forward.
Accessories holder for dreame v11 vacuum cleaner. Dreame v11 pipe is slippery so a little piece of double-sided tape may help to keep the holder in desired place.
I made this adapter to clean robot vacuum filters with a Dyson V15. It lets you vacuum the filter from the clean side instead of tapping it out or washing it. The idea is simple: push the filter into the adapter, connect it to your Dyson,…
Couldn't find replasement part so made my own Printed in PETG I had to find suitable spring under the holder to make it function properly (bought 200ps spring box that had right spring) Fits and works like original
Hi there, I’ve uploaded a small project for the Dreame H12 Pro accessory holders. These holders should also work with other Dreame models that use the same OEM holders. I noticed that the original holders weren’t holding everything…
I designed this simple holder for the original brush to ensure it is properly stored and ready for use. The model has been printed using white PETG filament, as its color matches the vacuum cleaner housing well. But PLA would be good as…
3051_Ruedines xiaomi dreame v9p para reemplazar los ruedines del cepillo de la xiaomi dreame v9p
My take on FlashForge Dreamer Z-axis shim. This one is bolted down for stability using two existing M3-0.5 x 8 mm socket head screws. You may need a shim if you increase the thickness of your build plate (for example, by installing a…
Simple mounting box for HEPA / carbon filter for Flashforge Inventor and Dreamer. Nice for printing ABS. The size is close to the maximum print size on the Inventor, and bolts directly on the back of the printer. HEPA/Carbon filters from…
This is a remix from http://www.thingiverse.com/thing:1897363 because I wanted to use the arms to hold a Logitech HD Webcam C310 on the Flashforge Dreamer. Use M3x20 or M3x15 screws to replace the two screws in the top of the Dreamer and…
Wird hinten links im Staubbeutel Kabinett, teils vor die Ansaugöffnung gestellt. Soll verhindern das der Staubbeutel die Ansaugöffnung blockiert und die Ansaugleistung schwächt. Vorher bitte messen. Höhe 120mm. Druck Settings. PLA 0.2 mm…
This holder is custom fit for the FlashForge Dreamer printer. It is designed to fit on the side of the unit where the removable grate is located. Very durable and provides a perfect fit for any bed scraper.
All found models of brackets for FIashForge Dreamer for 3mm glass plates did not fit on my device. Because the print bed of the Dreamer is wider than the 230mmx150mm glass plates the plates were not fixed safe on the bed and shifted…
Wallholder for dreamme power adapter
This 3D printable model is an add-on nozzle designed to fit the original Dreame vacuum cleaner crevice tool. It enhances the functionality of the standard nozzle and helps achieve better cleaning results in narrow and hard-to-reach…
The cross piece of the vacuum cleaner Dreame H12 pro
A wall mount for two accessories, designed similarly to the original.
My very first cad / 3d print project from many years ago After watching my new dreamer use the filament through the top holes as a band saw I thought, enough and I raked out a black bush to glue on (see pictures).
Print upright, no supports. version with divider or version without.
Dreame H12 wall mount for accessories. TESTED AND OPTIMALIZED HOW TO USE IT: MOUNTING TO WALL FEATURE: Better to use wall mount screw, but generally on the picture you can see version mounted on 3M strong double tape width 15mm and…
Messeradapter, um die originalen Messerteller, gegen 20cm Vollstahlmesser zu ersetzen. Der Schnitt wird um Welten verbes
Flashforge Dreamer Left and Right Wall Mount Spool Holders These mount to a wall or cart (in my case) I was able to find some on here but they were to large to fit the dreamer bed, so I came up with these to take care of that. no…
Funnel (entonnoir) for Dreame H14 (Pro)
