Pinecil adapter for HFS Drill Press stand - For heat set inserts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Used to mount a Pinecil soldering iron in a HFS Drill Press stand (and others) to use with heat set inserts.
- Ocena
- 4 / 5
- Polubienia
- 37
- Pobrania
- 121
- Wydruki
- 1
- Wyświetlenia
- 1965
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Adapter insert for HFS Drill Press stand (or any other stand that takes 44mm adapter rings) to mount a Pinecil soldering iron. The drill press stand can be found on Amazon here - (Not an affiliate link, was $27 USD at time of posting) https://www.amazon.com/dp/B08MTK8S7C?ref=ppx_yo2ov_dt_b_product_details&th=1
With CNC Kitchen coming out with heat set insert tools compatible with the TS100 and Pinecil soldering iron's, I wanted to create an adapter for my Pinecil while I wait for my heat set insert tools to arrive. And it gave me an excuse to figure out how to make a honeycomb pattern! The original idea came from this article (which includes an STL for an adapter that works well for Hakko and other soldering irons, but not the Pinecil) https://fixturfab.com/articles/diy-heat-set-insert-press/
Print with 0.45mm inner and outer walls. I printed this in ASA, but it should be fine in PETG, likely PLA, and possibly semi flex.