Button : Proudly made by a Maker -30 and 26 mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Some days ago I lost two buttons of my jacket in just two days... When I recovered the buttons, thinking that I'll…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 130
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Some days ago I lost two buttons of my jacket in just two days...
When I recovered the buttons, thinking that I'll have to sew them again, I realized how beatiful and full of face curves the design of a button is. I'm fascinated about these objects. They are a simple and small piece of art that do his job so well.
So I discovered myself thinking about made my own button and, at the end, I did it. I was so glad about the job that I decided to put the text: "Proudly made by a Maker".
Why I did my own button?
Because I'm a Maker.
Because I can.
You have the 30 mm (diameter) version and a 26 mm version with and without text. You also have the original freecad file to make your own buttons.
Wear them with proud!
PD: You can also access to the magnet version made by Akirasan. Thanks for the re design^^!
https://www.thingiverse.com/thing:2203855
Print Settings
Printer:
Prusa i3 bq Hephestos
Rafts:
No
Supports:
Yes
Resolution:
0,1
Infill:
20
Notes:
You have to print the buttons in VERTICAL. This is very important due to the face curves of the button and the small text. If you print a button in horizontal the result will be probably a mess. Remember also to put supports. I highly recommend to use a 0,1 mm resolution.
Category: Fashion