1 / 6
trash / tool box for Prusa Enclosure | custom text and bottom
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is nice small trash / tool box for the Prusa Enclosure. You can customize the text and the bottom in Prusa Slicer!
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 110
- Wydruki
- 2
- Wyświetlenia
- 1183
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (80)Powiązane
Slicer:
- The text and bottom are customizable in Prusa Slicer. (see image of the slicer) Included in the file is a modifier that adjusts infill and perimeter. In my example I used 20% honeycomb infill with 3 perimeters. (So no dust can collect in it haha)
- The text you can edit by double tapping it. You can also delete it, if you don't need the text.
- the file includes a colorchange for the bottom
- there is a version for the right and the left side. The one for the left side has some holes for screws of the enclosure frame.
Assembly:
- I used two M3 screws each with 8mm length and a nut. I had these left over from the enclosure
Compatibility:
- MK3S+: The box can be mounted both on the right and on the left. The SD card can be pulled out
- MK4: the right box may not be usable because the USB stick might be too long
happy printing :)