1 / 6
trash / tool box for Prusa Enclosure | custom text and bottom
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is nice small trash / tool box for the Prusa Enclosure. You can customize the text and the bottom in Prusa Slicer!
- Rating
- 5 / 5
- Likes
- 30
- Downloads
- 110
- Makes
- 2
- Views
- 1,184
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Slicer:
- The text and bottom are customizable in Prusa Slicer. (see image of the slicer) Included in the file is a modifier that adjusts infill and perimeter. In my example I used 20% honeycomb infill with 3 perimeters. (So no dust can collect in it haha)
- The text you can edit by double tapping it. You can also delete it, if you don't need the text.
- the file includes a colorchange for the bottom
- there is a version for the right and the left side. The one for the left side has some holes for screws of the enclosure frame.
Assembly:
- I used two M3 screws each with 8mm length and a nut. I had these left over from the enclosure
Compatibility:
- MK3S+: The box can be mounted both on the right and on the left. The SD card can be pulled out
- MK4: the right box may not be usable because the USB stick might be too long
happy printing :)