ZWO ASI224MC Astrophotography Imager Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case for securely holding and transporting the ZWO ASI224MC Astrophotography Imager
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 547
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
One entry in a line of eyepiece cases I'm working on to encompass my whole eyepiece/lens collection. This case is built around the ZWO ASI224MC Astrophotography Imager. It's a very tight fit (by design), so it's unlikely it will work with any other ZWO imager, but if people are interested, I'll be happy to share the .step so people can modify to suit their needs - or if you ask nicely and provide detailed measurements, I can whip one up for you!
The case is intended to be printed with PETG for the primary case and cap. The remaining pieces are intended to be printed in TPU, and are added as liners to the main hardshell case. This 2 layer system is intended to provide a reasonable degree of shock absorption and fall protection to the case.
Recommended Settings
Case & Cap
Walls: 6
Infill: 25%
Layer Height: 0.2mm
TPU Liners
Walls: 3
Infill: 10% concentric
Layer Height: 0.2mm
The screw threads on the bottom of the cap are there so that each case can screw into a carrying case that I'm going to post later for ease-of-transport