1 / 1
ZWO ASI224MC Astrophotography Imager Case — image 1

ZWO ASI224MC Astrophotography Imager Case

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A case for securely holding and transporting the ZWO ASI224MC Astrophotography Imager

Rating
0 / 5
Likes
13
Downloads
30
Makes
0
Views
547
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial — Share Alike

One entry in a line of eyepiece cases I'm working on to encompass my whole eyepiece/lens collection. This case is built around the ZWO ASI224MC Astrophotography Imager. It's a very tight fit (by design), so it's unlikely it will work with any other ZWO imager, but if people are interested, I'll be happy to share the .step so people can modify to suit their needs - or if you ask nicely and provide detailed measurements, I can whip one up for you!

The case is intended to be printed with PETG for the primary case and cap. The remaining pieces are intended to be printed in TPU, and are added as liners to the main hardshell case. This 2 layer system is intended to provide a reasonable degree of shock absorption and fall protection to the case. 

 

Recommended Settings

Case & Cap

Walls: 6

Infill: 25%

Layer Height: 0.2mm

 

TPU Liners

Walls: 3

Infill: 10% concentric

Layer Height: 0.2mm

 

The screw threads on the bottom of the cap are there so that each case can screw into a carrying case that I'm going to post later for ease-of-transport

Tags