Ikea ÖRTFYLLD Spice jar organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Organizer for Ikea ÖRTFYLLD Spice jars
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 131
- Wydruki
- 2
- Wyświetlenia
- 1136
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Organizer designed to maximize space efficiency in a shallow kitchen drawer.
It can house 12 spice jars (4 per row). Can be printed in 3 pieces and joined together with the integrated aligner pins, no glue or other hardware needed.
I also included a variant with no aligner pin, in case you only need one.
Parametric Fusion 360 file also included!
Dimensions
One organizer is 178mm x 121mm and ~57mm high with the jar in it.
It can be printed on a Prusa Mini, see the guide below.
Fitment test
Before printing the whole set, it's a good idea to print the aligner fitment test, so you can be sure the final pieces will fit together nicely. It should be a snug fit. If you find that they are too loose or can't fit together just open the parametric .f3d file I attached and edit alignerTolerance accordingly.
Print orientation
Printable without supports, use the orientations below. Note the aligner pin always facing upwards.
Aligner fitment test, these should be in the same orientation as the final pieces.
Bottom part
Middle part
Top part
Print settings I used
- 0.2mm layer height
- No supports
- 10% infill
- Outer brim 2.4mm just to be sure it will not come off as the model is very high for the contact area
I've used PLA, but other materials could also work.