Voron Trident BTT Pi TFT 70 Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
On 300mm Trident the 250mm left and right skirt will need to be used as this is wider then the standard screen mount
- Ocena
- 0 / 5
- Polubienia
- 46
- Pobrania
- 253
- Wydruki
- 0
- Wyświetlenia
- 1811
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
To mount the screen add the screen surround to the screen, then use 4 x M2.5x6 SHCS machine screws to mount the screen.
Then use 2 x M3 T-Nut and 2 x M3x8 SHCS and mount to the frame. Image may need to be flipped.
The brightness knob is at the bottom for easy access.
I printed as per the parts on the plate image with standard Voron settings and no support or brim.
I have never tried but I guess this might work on the Voron 2.4 if the next size smaller front left and right skirt is used.
The Idea came from the LDOVoronTrident Touchscreen Mount for BigTreeTech Pi TFT4.3
From the Trident_Assembly.f3d I used the following parts
front_skirt_a_300
front_skirt_b_300
rear_center_skirt_300