1 / 5
Ender 3 S1 Filament Spool Holder with Runout Sensor Mount Front Orientation on Bearings — zdjęcie 1
1 / 5

Ender 3 S1 Filament Spool Holder with Runout Sensor Mount Front Orientation on Bearings

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Filament spool holder that uses 608-2RS bearings. Conveniently load the spool from the front. Runout sensor mount.

Ocena
4 / 5
Polubienia
20
Pobrania
99
Wydruki
1
Wyświetlenia
1551
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I needed a different spool mount due to my workspace configuration.  This spool holder uses bearings for smooth operation and allows me to load the spool from the front of the printer.  The filament runout sensor can be mounted directly on the spool holder as well.

I printed this using PETG with 10% gyroid pattern infill, however you may be able to print it with PLA with a higher infill percentage.  I will report after some usage if I need to redo with a higher infill as 10% may be too weak.

All parts except the 608-2RS bearings (quantity 2) can be printed.

There are three stl files included.  Print the main part, the roller, and two pins.  You may need to use a screwdriver to wedge the roller assembly (bearings, pins, and roller) into the main part.

I designed this to be printed without any supports.

 

Tagi