RIEGGÅ - Parametric drip irrigation hose adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametrizable adapter for hoses with two rings
- Ocena
- 0 / 5
- Polubienia
- 117
- Pobrania
- 516
- Wydruki
- 0
- Wyświetlenia
- 2132
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Parametrizable adapters for low pressure hoses for a hurry. The central part is to use one spanner, it rounds to millimeters.
For other sizes, just change the values of the parameters hoseDiameter in the spreadsheet for your needs
There is some confusion in the denomination of the different hoses, sometimes the inner diameter is used, others the outer one. Sometimes in inches an others in rounded millimeters
This table is for the models supplied.
| ID in | ID mm | OD mm | found denominations |
| 4 | 6 mm | 4x6, 6mm, 4mm | |
| 1/4 | 6.35 | ||
| 3/8 | 9.525 | ||
| 1/2 | 12.7 | 16 mm | 13x16, 16mm, 13mm |
| 5/8 | 15.875 | ||
| 3/4 | 19.05 | 25 mm | |
| 1 | 25.4 | 32 mm | 32 mm |
How to print
The first diameter in spreadsheet should be the bigger one and lay on the bed when printing. There is an angle parameter to avoid the use of supports, default is 30º. The parameter wall is for the size of the inner hole. When the wall is bigger the through hole is narrower.
