1 / 2
Cat Tree Replacement - 59mm — zdjęcie 1
1 / 2

Cat Tree Replacement - 59mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement for joint on Cat Tree - 59mm Diameter

Ocena
0 / 5
Polubienia
14
Pobrania
53
Wydruki
0
Wyświetlenia
395
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Public Domain

The plastic piece that helped secure the cat tree broke due to years of use.  This model includes a bit more plastic than the original, however I felt it added to the structural integrity since the original broke.  

I have uploaded two versions of the model, one with and one without ridges.  I find the ridges help with the fit, however mine fits in a cardboard tube.  

There is a space for a nut to be embedded in the model.  You will need to add a pause in your slicer to take advantage of this.  

I printed with 80% cubic infill, but that is probably overkill.  Do what works best for you, though I would recommend at least 50%.  

This was printed using PLA.

Tagi