Cat Tree Replacement - 59mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement for joint on Cat Tree - 59mm Diameter
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 53
- Makes
- 0
- Views
- 395
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Public Domain
The plastic piece that helped secure the cat tree broke due to years of use. This model includes a bit more plastic than the original, however I felt it added to the structural integrity since the original broke.
I have uploaded two versions of the model, one with and one without ridges. I find the ridges help with the fit, however mine fits in a cardboard tube.
There is a space for a nut to be embedded in the model. You will need to add a pause in your slicer to take advantage of this.
I printed with 80% cubic infill, but that is probably overkill. Do what works best for you, though I would recommend at least 50%.
This was printed using PLA.
