Rotorama Calypso with DJI O3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Soft mount for O3 camera and AirUnit to Rotorama Calypso frame
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 400
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
Rotorama Calypso frame provides enough space for DJI O3 airunit but there is an installation problem. I designed two sleeves around the airunit to fix it in the frame. One sleeve has extra space for XT60 connector and antenna mount.
Because of very sensitive Gyro in the O3 camera was necessary to mount this camera using softmount. I tuned this softmount for a long time and a lot of attempts. Here is only the final. But other version you can see here:
With model Soft_cam_mount-stiff_unsafe.stl the camera is pushed more forward so the sides of the frame are not in the picture.
All print I made from Flexfill 98A on 0,2mm layer height.
Good luck…