Gridfinity Refined Plate-to-Plate with tighter tolerances
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity Refined Plate-to-Plate with tighter tolerances
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 230
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Gridfinity Refined Plate-to-Plate with tighter tolerances
Default tolerance was 2*1.2mm, current is 2*0.1mm, distance to next plate has 0mm offset since it has enough room to move around a little.
Plate is being also lowered by 0.4mm to make room for main plate sagging while bridging or other imperfection if printing with bigger nozzle.
Test with ABS
Print instruction:
To get nice fast printing with out any glitches
Layer: 0.2 Quality
Top and Bottom layer: 0
Parameter: 7
InfIll: 0%
If you want it to be closed go with
Top and Bottom layer: 3
infill: 15%
ironing: enabled