Gridfinity Refined Plate-to-Plate with tighter tolerances
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gridfinity Refined Plate-to-Plate with tighter tolerances
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 32
- Makes
- 0
- Views
- 230
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Gridfinity Refined Plate-to-Plate with tighter tolerances
Default tolerance was 2*1.2mm, current is 2*0.1mm, distance to next plate has 0mm offset since it has enough room to move around a little.
Plate is being also lowered by 0.4mm to make room for main plate sagging while bridging or other imperfection if printing with bigger nozzle.
Test with ABS
Print instruction:
To get nice fast printing with out any glitches
Layer: 0.2 Quality
Top and Bottom layer: 0
Parameter: 7
InfIll: 0%
If you want it to be closed go with
Top and Bottom layer: 3
infill: 15%
ironing: enabled