Tomas's Wet Palette
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a complete redesign of the model by David Warboss.
- Ocena
- 3,5 / 5
- Polubienia
- 52
- Pobrania
- 452
- Wydruki
- 3
- Wyświetlenia
- 3102
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
This is a complete redesign of the model by David Warboss. I made it larger, and added a contour on the lower tray edge to be comfortable when resting my hand. I also experimented with a "snap-fit" new design component.
Note: due to the close tolerances of the snap-fit cover, if it is hard to close... run a razor knife along the inside of the lip on the cover to lightly scrape off some material. Do this until it snaps closed comfortably.
I will fix this in a later revision but, the small amount of post-work is not a big deal right now.
Future: I want to add a groove for a seal/o-ring (probably a TPU design)
UPDATE 11/18/2022: Repaired tray cover STL