Tomas's Wet Palette
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a complete redesign of the model by David Warboss.
- Rating
- 3.5 / 5
- Likes
- 52
- Downloads
- 452
- Makes
- 3
- Views
- 3,102
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
This is a complete redesign of the model by David Warboss. I made it larger, and added a contour on the lower tray edge to be comfortable when resting my hand. I also experimented with a "snap-fit" new design component.
Note: due to the close tolerances of the snap-fit cover, if it is hard to close... run a razor knife along the inside of the lip on the cover to lightly scrape off some material. Do this until it snaps closed comfortably.
I will fix this in a later revision but, the small amount of post-work is not a big deal right now.
Future: I want to add a groove for a seal/o-ring (probably a TPU design)
UPDATE 11/18/2022: Repaired tray cover STL