Pac Man Key Holder No MMU Required
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pac Man Key Holder No MMU Required
- Ocena
- 4,75 / 5
- Polubienia
- 282
- Pobrania
- 654
- Wydruki
- 2
- Wyświetlenia
- 6415
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Pac Man Key Holder No MMU Required
Print instructions
Pac Man Key Holder No MMU Required. Keep your keys together. No MMU required. Sliced in PrusaSlicer with Multilayer color change. I use the ironing on all top layers. Printed in PLA with 0.6 nozzle and .3 layer.
To assemble print the holder that you want, the yellows dots that you will be using, 4 ghosts, Pac Man and Ms Pac Man (if using) or Ms Pac Man Mirror if using Ms Pac Man only. Pay attention to the name of the holder (Board) you will be using. The keychain board has the cut outs for the keychains.
The Ghosts and Ms Pac Man have 3 color changes and Pac Man and the holder have 2. I made 3 keychain holders, one with Pac Mac and 4 ghosts, another with Ms Pac Man with 4 ghosts and the other one has Pac Man, Ms Pac Man and 4 ghosts.
Each holder has 2 versions, one with holes and the other one with no holes. One you can bolt it on the wall using #6 screws and the other one you can use double sided tape. The chain and the rings got them from my local crafts store.
Like and share for the Prusa contest =)