Adjustable endstop for Z-axis on ShenzenTech Printer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small modification to add an adjustable Z-Endstop to my ShenzenTech Printer.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 240
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
A small modification to add an adjustable Z-Endstop to my ShenzenTech Printer.
Print instructions
Category: 3D Printer Parts Summary
A small modification to add an adjustable Z-Endstop to my ShenzenTech Printer.
Print Settings
Printer:
Prusa i3 China Derivated
Rafts:
Doesn't Matter
</div>Supports:Doesn't Matter
Resolution:
0.2
</div>Infill:40%
Post-Printing
Requirement
Adjustment:
Every holes may need to be drill a little (While designing it I had considered it was best too tight than too loose)
Parts needed:
- 2x longer 3mm screw for the fixation to the X-carriage
(for the original ShenzenTech X-carriage 22mm is OK) - 1x 5mm screw for the adjustment screw.
How I Designed This
UPDATEs:
v1.4: Little positioning adjustment of the holes used to fix the support to the printer.
v1.3: Better functional dimensioning to match the original ShenzenTech parts.
(Having replace one part I was able to do fine measuring)
v1.2: Adjustment of the endstop positioning vs motor's axis