Adjustable endstop for Z-axis on ShenzenTech Printer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small modification to add an adjustable Z-Endstop to my ShenzenTech Printer.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 18
- Makes
- 0
- Views
- 240
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
A small modification to add an adjustable Z-Endstop to my ShenzenTech Printer.
Print instructions
Category: 3D Printer Parts Summary
A small modification to add an adjustable Z-Endstop to my ShenzenTech Printer.
Print Settings
Printer:
Prusa i3 China Derivated
Rafts:
Doesn't Matter
</div>Supports:Doesn't Matter
Resolution:
0.2
</div>Infill:40%
Post-Printing
Requirement
Adjustment:
Every holes may need to be drill a little (While designing it I had considered it was best too tight than too loose)
Parts needed:
- 2x longer 3mm screw for the fixation to the X-carriage
(for the original ShenzenTech X-carriage 22mm is OK) - 1x 5mm screw for the adjustment screw.
How I Designed This
UPDATEs:
v1.4: Little positioning adjustment of the holes used to fix the support to the printer.
v1.3: Better functional dimensioning to match the original ShenzenTech parts.
(Having replace one part I was able to do fine measuring)
v1.2: Adjustment of the endstop positioning vs motor's axis