Large Ice Cubes Mold Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mold to make a giant ice cube tray.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 92
- Wydruki
- 0
- Wyświetlenia
- 1279
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- GNU General Public License v2.0
NEW AND IMPROVED VERSION AVAILABLE HERE: https://www.printables.com/model/560982-customizable-large-ice-cubes-mold-tray
A mold to make giant ice cubes. The ice cube tray will produce 3 large ice cubes (150mm x 45mm x 45mm).
Fill the mold with food grade silicone - I used 30A silicone, using 15A to 60A shore hardness is recommended. Be patient when removing the cured silicone, you might want to use a fine blade to scrape the sides and separate the silicone tray from the mold.
Printed at 0.20mm layer height with two wall loops and 15% infill.
You will need about 325ml of silicone.
Make sure your printer is properly calibrated, the end plate holes have a very tight tolerance (0.05mm) You might want to adjust the hole compensation or do some post processing and enlarge the holes a little bit.
I might upload a remix with easier tolerances and different ice cube sizes.
- I did :P see improved version below
NEW AND IMPROVED VERSION AVAILABLE HERE: https://www.printables.com/model/560982-customizable-large-ice-cubes-mold-tray
Thanks!