Large Ice Cubes Mold Tray
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mold to make a giant ice cube tray.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 92
- Makes
- 0
- Views
- 1,279
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- GNU General Public License v2.0
NEW AND IMPROVED VERSION AVAILABLE HERE: https://www.printables.com/model/560982-customizable-large-ice-cubes-mold-tray
A mold to make giant ice cubes. The ice cube tray will produce 3 large ice cubes (150mm x 45mm x 45mm).
Fill the mold with food grade silicone - I used 30A silicone, using 15A to 60A shore hardness is recommended. Be patient when removing the cured silicone, you might want to use a fine blade to scrape the sides and separate the silicone tray from the mold.
Printed at 0.20mm layer height with two wall loops and 15% infill.
You will need about 325ml of silicone.
Make sure your printer is properly calibrated, the end plate holes have a very tight tolerance (0.05mm) You might want to adjust the hole compensation or do some post processing and enlarge the holes a little bit.
I might upload a remix with easier tolerances and different ice cube sizes.
- I did :P see improved version below
NEW AND IMPROVED VERSION AVAILABLE HERE: https://www.printables.com/model/560982-customizable-large-ice-cubes-mold-tray
Thanks!