Modular Stove Shelf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjustable and modular shelf for the top of a stove (at least mine!)
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 531
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
This is a modular shelf that I made for my stove. The pictures only show one one complete unit, but you can put one shelf next to each other with or without the side walls for a continuous or partitioned design.
The shelf is 82mm deep, which is just enough for a larger sized bottle of olive oil. The shelf is 228mm wide without the side walls or 212mm between the inside of the walls installed.
I printed in PETG and used supports on the front hooks on the bottom of the base shelf. You may need to modify these hooks based on your needs. I also used brims for the component prints to give them a little more support from tipping over, especially the bolts. I did include some .3mf files if you wanted to see how I did the supports.