Dehumidifier reel holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keep your filament in a low humidity environment and feed it direct to the printer.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 316
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
The inspiration was an aluminium vacuum cleaner tube I picked up from a bin one day… I wanted a reel holder and dehumidifier but I have a few reels of 2kg recycled filament, and most will not fit that large reel. Once I found the big airtight container it came together easily.
In addition to the printed parts you will need:
8mm rod - steel, aluminium, material not critical
Bowden tube fittings, I used 6mm thread fittings
608 size skateboard bearings
Nut to fit your bowden ftting
3 x 8mm teflon washers
Silica gel, loose
Airtight container, 12.5 litre Decor Tellfresh
(optional) temperature and humidity sensor
If you don't have a vacuum tube to cut up and reuse just remix the "tube bearing housing" part to fit the tube you do have. Some PVC plumbing pipe would work well.
Assembly video: