Heavy Duty Strong Hinge 4x4 to 2x4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed to design a strong hinge that could be used to hold a gate or a door potentially.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 149
- Wydruki
- 0
- Wyświetlenia
- 539
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed to design a strong hinge that could be used to hold a gate or a door potentially. Give it a try let me know what you think! Originally, I had in mind a 4 by 4 post and a 2 by 4 gate, but it should have numerous functional uses where a strong heavy-duty hinge is required. I'd love to see pictures of your usage of this design. I printed this one in ASA because I wanted it to be UV stable, But I have also printed it in PLA Plus. I designed this part with very tight tolerances and little wiggle room, after it prints you must “break it free” but it should be extremely crisp with no slop. I printed this with an Ender 3 S1 Pro, an Ender 2, and a K1 Max.
Because this is a technical, structural part, I would recommend cranking up the printing temperature just a bit to improve layer adhesion.
2-3 walls
4 Bottom
4 Top
65-85% infill