1 / 7
Sovol SV06 5015 Fan Mount (heatcreep fix)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement for the standart 4010 fan.
- Ocena
- 4,75 / 5
- Polubienia
- 40
- Pobrania
- 296
- Wydruki
- 5
- Wyświetlenia
- 1881
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 5) (Komentarze: 8)Remiksy (3)Kolekcje (71)Powiązane
It does not decrease the printing area, but you need to turn the extruder stepper by 180° and extend the cable.
You need 2 m4x 20mm screws
I compared it against my 4020 fan mount. The 4020 mod idled at around 40°C and with the 5015 around 30 - 35 °C.
I apologize for the messy design, but the original files from Sovol where weird.
I dont know anythink about fluid dinamics, so there is stil a lot of improvement.