Saw Guide with hard-doweled notch for Hacksaw
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cut the metal stock, not the plastic fixture : this tool is reinforced with hard steel dowels for durability & accuracy.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 613
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Plastic sawguides are great… except that often they're softer than the materials being sawn.
Now make square cuts with confidence : this tool is reinforced with hard steel dowels *.
Interchangeable jaws accept different material shapes. The Vee jaws accommodate round materials from 4 mm to 30 mm.
FreeCAD users can use the provided source model to create extra jaws.
* 4 off dowels Ø6 x 50 mm : DIN 6325 : hardened & ground
I had to gently drill out my dowel holes to make them fit. With a well-printed component and appropriate value of the “Horizontal Expansion" (Cura) parameter this mightn't be an issue.
Ideally the dowels should rotate when provided with a little grease, but shouldn't be too loose or the cut will be less accurate.