Saw Guide with hard-doweled notch for Hacksaw
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cut the metal stock, not the plastic fixture : this tool is reinforced with hard steel dowels for durability & accuracy.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 58
- Makes
- 0
- Views
- 613
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Plastic sawguides are great… except that often they're softer than the materials being sawn.
Now make square cuts with confidence : this tool is reinforced with hard steel dowels *.
Interchangeable jaws accept different material shapes. The Vee jaws accommodate round materials from 4 mm to 30 mm.
FreeCAD users can use the provided source model to create extra jaws.
* 4 off dowels Ø6 x 50 mm : DIN 6325 : hardened & ground
I had to gently drill out my dowel holes to make them fit. With a well-printed component and appropriate value of the “Horizontal Expansion" (Cura) parameter this mightn't be an issue.
Ideally the dowels should rotate when provided with a little grease, but shouldn't be too loose or the cut will be less accurate.