Spindle Encoder Mount and Coupling
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bracket and coupling to mount an Omron rotary encoder on the spindle of my SIEG SC4 lathe, for use with the Clough42…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 894
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
A bracket and coupling to mount an Omron rotary encoder on the spindle of my SIEG SC4 lathe, for use with the Clough42 ELS system.
The coupler is 16mm to 6mm, with a 4mm keyway for the larger shaft, and a hole for a 3mm set screw to secure the smaller shaft.
Bracket uses a 1/2" stud that replaces the lower right cap head screw (see pics). This is a fabricated part and you'll need to make one. Length is to suit.
I'm putting these on thingiverse in the hope it may help other SC4 owners, but usual caveats apply - these fit my lathe, with the dimensions of my spindle shaft and the distance of the spindle & stud location centres. It's also specific to the Omron encoder that I'm using (E6B2-CWZ6C 1024P/R)
I've uploaded the STEP files, in case anyone wants to tinker
Print instructions
Category: Machine Tools Summary
A bracket and coupling to mount an Omron rotary encoder on the spindle of my SIEG SC4 lathe, for use with the Clough42 ELS system.
The coupler is 16mm to 6mm, with a 4mm keyway for the larger shaft, and a hole for a 3mm set screw to secure the smaller shaft.
Bracket uses a 1/2" stud that replaces the lower right cap head screw (see pics). This is a fabricated part and you'll need to make one. Length is to suit.
I'm putting these on thingiverse in the hope it may help other SC4 owners, but usual caveats apply - these fit my lathe, with the dimensions of my spindle shaft and the distance of the spindle & stud location centres. It's also specific to the Omron encoder that I'm using (E6B2-CWZ6C 1024P/R)
I've uploaded the STEP files, in case anyone wants to tinker
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
</div>Rafts:No
Supports:
Yes
</div>Resolution:0.2
Infill:
25%
</div>Filament:
[
Real Filament PETG ](http://www.amazon.com/s?url=search-alias&field-keywords=Real+Filament+PETG&tag=tvad0304-20) Black
Notes:
Supports required for the coupler - print large diameter down, and turn on / put support in the 16mm bore and keyway.
Run appropriately sized drill bits down the various holes to ensure they are on size.
Tap the hole in the side of the smaller end of the coupler to M3, and use an M3 set screw to lock the shaft in place
Mounting hardware for the encoder is 3x M3 x 10 cap heads. Pinch bolts on the bracket are M3 x 16, with washers and nylock nuts to match.