Mona Lisa Lithophane
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a lithophane of the famous Mona Lisa (La Gioconda) by Leonardo da Vinci. When printed in FDM it's best to…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 180
- Wydruki
- 0
- Wyświetlenia
- 759
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Share Alike
This is a lithophane of the famous Mona Lisa (La Gioconda) by Leonardo da Vinci.
When printed in FDM it's best to print on a side (upright) to benefit from the layer resolution, also PLA is better because of less warping. The one in the picture was printed upright in white PLA (0.15 mm layers) on a PP3DP Up! Plus. It's best to use opaque material like white or yellow, ABS is possible but will warp more because of the thin structure.
--> Update 2023-04-29 <------The original file was very large so I added a reduced version that should work fine.