stable sheet holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The holder fits mostly all available sheets for 3D printing and fits in origin dimensions sheets with thickness of 3mm.
- Ocena
- 5 / 5
- Polubienia
- 58
- Pobrania
- 462
- Wydruki
- 13
- Wyświetlenia
- 1892
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
The holder fits mostly all available sheets for 3D printing and fits in origin dimensions sheets with thickness of 3mm. The thickness can be easily increased/decreased by dimension adjustments for the width within Prusa Slicer.
The holder does not need more space on a bench than its footprint.
In addition i clued four EPDM pads to the bottom to protect holder of slipping away...basically it is now fixed on the bench.
Print instructions
Print Settings
Printer: I3 MK3S
Material: PLA blue (GreenTec black)
Rafts: No
Supports: No
Resolution: 0.3
Infill: 12.5% (Gyroid)
Speed: 45mm/s
o. perimeter: 35mm/s
Print hints
If you place starts and stops to the back and for the higher areas at the front between the slots you will get an perfect outer perimeter.