Liczymy pasujące modele…
The Solder Scroll makes soldering more ergonomic by allowing you to just scroll on the pen shaped tool to add solder. By rotating the knob, the tool can be adjusted to accomodate different diameters of soldering wire (0.3 - 1.5mm). A…
Adjustable utility knife Vertical and horizontal versions + 2 Self Tapping Screws M2.6 L8. Horizontal versions: Vertical version: Use 2 Self Tapping Screws M2.6 L8. Note: Follow safety precautions when working with a blade!
Designed for ventilation openings in windows and balcony doors. Diameter is 180 mm. Its adjustable structure allows it to be closed in bad weather. For installation, 1 × M4 bolt (the bolt length depends on your window modification;…
V3.0 is the latest version and more compact due to the 90 degree turn i did with the probe
Sonos Beam Mount for Apple Studio Display (height-adjustable stand) A one-piece bracket that hooks into the cable slot of the Apple Studio Display's tilt- and height-adjustable stand and holds a Sonos Beam (Gen 1) right below the display.…
Adjustable Shower Head Holder. If the holder slides too easily in the collet and it cannot be clamped, treat the hinge surfaces with cyanoacrylate glue and let them dry.
This stand holds an electronic screen at any convenient angle. It is sturdy, easy to assemble and print, and folds up for storage. Small sizes can fit in your pocket, and the largest size can hold a tablet. It can also accomodate…
!!! Print it on its back !!! Print time for SLIM V1 version is about 3h 20m Print time for WIDE V2 version is about 7h Print time for AX (Snap) Wide V3 is about 5:30 Base, 1:10 Ladder, 0:20 Leg I have tested only 0.4 nozzle so go above or…
Adjustable ventilation cap. I use it with a laser engraver to regulate suction. Diameter 60mm An M5 socket head bolt and nut are required for assembly
Stand is made from more parts. Use “AsemblyScheme.pdf” (and instant glue). You will nedd more parts : Screws : M3x12; M8x16; M4x10 Pads : Felt pads 38mm, Silicone pads 10mm see the “AsemblyScheme.pdf” Good Luck … :)
This is a arm for a Magsafe charger or a stand which can be moved and held in a wide variety of positions. It can be mounted right side up or upside down. The clamp is 50mm so should be able to mount to most furniture -When changing the…
Estas son partes complementarias al trabajo realizado por theamzngq en su “ Adjustable iPad Air 2 mount ”. Una base con un poco mas de peso y sin modificar las dimensiones que se realiza insertando en medio de la impresión 20 tuercas M8.…
Needed 7 filament guides instead of the regular 6. Rather than making a fixed set, I opted for a dovetail rail with separate guides, so I could print as many as I need while still being able to adjust back to 6 or other number later…
Scale model stable suitable for a nativity scene with 1:15 scale figurines (e.g. 80-100mm in height when standing). The design includes 33 separate model files, including: Walls (textured) Wooden posts and door (complete with texture)…
Updated Version 2 available easy to use. This tool allows users to create music staffs of adjustable sizes, ideal for personalized music notation. Whether you're a musician sketching ideas, a composer drafting a new piece, or a teacher…
I found myself playing my steamdeck mostly on tabletops and when using this stand the angle was uncomfortable for my hands, so I decided to remake it with sharper and adjustable angles. This stand can be positioned in 5 angles and fits in…
Intro Winter returns back to the northern hemisphere… Cold days and frosted cars are back… Car owners need a good and stable ice scraper now. And this is exactly what this model delivers! Why you'll love it? Print is done really easy…
Hi, Here's a sheepfold or stable kit, you can make using laser cutting or 3D printing. For laser cutting, the thickness is designed for 3mm wood or cardboard. It is possible to scale it for another thickness. - 2 x Cote - 6 x Toit - 1 x…
1:20 - around stables for animals around 10-14cm in height. Actual size 300x220x160 mm for walls, and 330x260 mm for roof. All parts can be done without supports. Major parts done on Prusa XL 0.6 nozzle 0.4 layer, and used layer modifier…
Just an easy to print model with snap fits for the usb and psu module.
In case you have trouble adjusting the leg - you can use this handle
I am working on adding a larger heel part soon. The arms must be inserted into the inner sides of the toe arms on the WinWing Orion 2. They jus snap in. The heel part slides in after that and can be fastened inthe preferred position.…
I use an amazon basics condenser mic on my desk (yeti clone), and I mount it on an arm so I had the original support mounting holes free to hook a filter onto it. The thing definitely works and I'm happy with it, the grill is just 2…
Hello! This is a basic adjustable phone stand with space for a small tablet. The design is such that there are three levels of adjustment and cable lead; both give versatility and convenience to the design. In addition to these features,…
A simple, easy to print keychain adjustable wrench. Made of only three parts, with generous tolerancing yet still retaining great functionality, it is easy to customize with colors or scaling it up or down (Smallest I have managed to…
Keep your gym tidy and your plates organised. This custom-designed holder is made to perfectly fit the weight plates from adjustable competition-style kettlebells, so you’ll never have to dig through a pile of plates again. 🔩 Compatible…
This is a desk stand for a small desk mixer, It's designed to fit the foot stubs and screw holes of the Beringer Xenyx 302USB with an adjustable tilt This uses 0.75mm gauge paper clip for pins.
Length ajustable right angle tool - slide the ruler in and out + straight line tool - place pencil in the hole and go!
Easy ruler for reading how much weight is on the Eisenlink Adjustable Dumbbell (https://www.amazon.co.uk/dp/B0BZHHCSFD) The left side of the ruler measures when only the 2kg plates, are used. Read the right hand side when 2 x 1kg plates…
This stand is designed to keep your Coleman propane cylinder stable and secure during use. Its modern design combines functionality and style, featuring a hexagonal texture for a sleek look and an embossed Coleman logo. Compatible with…
This custom-designed Wyze Cam 4 mount provides a stable and adjustable solution for optimal camera positioning. The mount can be used for wall or ceiling installation , ensuring a wide range of motion for better surveillance coverage.
It fits into a regular 36 mm (OD) waste pipe with an inner diameter of 31.6 mm. Intended for air ventilation purposes, not liquids. I made it a bit loose to ensure it went in without compressing the printed thread. Needed a couple of…
Ajustable parametric model of a two part towel holder with place for rubber feet, printable on small printers ( can be ajusted via bed length variable in project "VarSet" sheet ) ajustable wall thickness ajustable overall length Modeled…
Shelly BLU Motion Wall Mount Bracket with adjustable Snap Fit Connection - Staffa di montaggio a parete con attacco a scatto regolabile Hardware: 2 pcs M3 x 5mm Phillips Pan Head Screw DIN 7985 or similar 1 pcs M3 x 10mm Phillips Pan Head…
Uses pan head screws for both adjustment holes and end attachment. The screws should thread into the part, so print with several walls. I printed in abs, but other materials should work as well. The parts adjust from approximately 210mm…
Adjustable anti-backlash adapters for the X and Y axis on the 3018 CNC. Y axis fits stock set up. X axis fits with upgraded Z axis and MGN12H adapters. See my other files for those.
Adjustable 3D-Printed Glasses Retainer Choose either the large or small attachment model. The small one is designed for very small glasses, while the large is better suited for most glasses. Never lose your glasses again — this…
Hawse Fairlead with adjustable fixing slot 254mm/10" Passacavo per verricello Overall dimensions: 300x67.5x18mm Centre to centre 254mm / 10" Standard Bolt Mount Pattern with adjustable fixing slot Mounting hardware needed M10 / 3/8" bolt…
English Adjustable 3D-Printed Stand for iPad Pro M4 & M5 11” (2024 & 25) – Dual-Color Modern Design with Integrated Apple Pencil Charging Key Benefits: • Multi-purpose versatility: Three optimized angles (85°, 50°, 25°) perfectly suited…
I have a Meade ETX-70 telescope and wanted to try some astrophotography. I found a design someone else had made, but unfortunately, it didn’t fit my telescope at all, and there was no CAD file included. So, I decided to redesign it from…
I printed out the Rift laptop stand and liked it but wished it was heavier. So I modeled up an adjustable laptop stand that can be filled with whatever you want, I chose lead shot because it was much heavier than sand or concrete and…
This is a strong and practical dual spool holder for 3D printing filament. It supports either two standard spools or one heavy 3kg spool . The center includes a removable spacer disc , allowing you to easily switch between dual spools or…
Mechanical Adjustable Phone Stand This multi-part phone mount combines functionality with smart engineering. Featuring a built-in worm gear controlled by an adjustment knob, it lets you fine-tune the viewing angle with precision. The…
This is a model that combines the govee rgbic tv lights with The multifunctional Adjustable desk mount for betting mounting options. This was designed to to use with a corsair xeneon flex monitor.
Adjustable phone stand that uses a thumb screw for precise adjustments of the phone angle for perfect screen viewing. step file is also provided for customizing the phone back plate. Printing: Material: PLA works fine. Layer height:…
I am not a great pinball player but I love it. For my games I have at home I like to set them up to be easier for myself but also for friends that come over and are totally new to pinball. Some games are pretty hard for novices and it's…
Using little stones, marbles or similar, you can adjust the weight and sinking speed of this diving ring. There are three options available: Magnetic: Everything is held in place using 6x2 mm magnets. Depending on the magnets strength,…
A small and simple water dish that that has little pegs to help hold up a potted grocery store plant. Fits a 80mm x 80mm pot as is, but I am including the CAD model which will allow you to adjust the parameters to fit a pot of another…
Vertical stand with adjustable depth for use with straight rails, angled rails, hooks, bumpers, and more. The “foot” of the stand attaches to the “base” of the stand using: Four M5x20, M5x25, or M5x30 countersunk screws M5 heat set…
This is adjustable support for GPU from 55 mm to 90 mm. I uplouded Fusion 360 files so you can modify it.
Added side supports to use the Cloweit LBE-04 inductive proximity sensor
For best results, print solid. PLA 0.2mm layer height Disclaimer: I make no promises or claims about the safe weight-carrying capacity of this model. You make use of this at your own risk with no liability or responsibility from me.
This is a laptop stand that has pins that can adjust to any size needed using the bar extension to add 2 bars together if required strong enough to hold any laptop you may need can be entirely printed on one 220*220 build plate. How to…
*Heat-set inserts required* Thank you for checking out my model. The problem this model aims to solve is that I would have to take off my webcam every time I wanted to rotate my monitor. It also provides a stable mount for the webcam…
Remix of @DaveDUtah_155970's adjustable blind spot mirror mount for my 2024 Hyundai Kona EV. You'll need to remove the corner panels from the doors and clip one socket side of the print around each. This will be held in place by tension…
Splice tray with adjustable loop length. For optical fiber joints.
3D printed adjustable Phone Stand assembly video : https://youtube.com/shorts/c39V2KsjZcw?feature=share Stand only, tesla charging station is available for free in my other items
✅ Compact & sturdy design ✅ Easy to print – no supports needed ✅ Simple height adjustment ✅ 4 / 5 mm screw holes for mounting
You need: Recommend to print in ASA 2x M3 hex nuts 2x M3x16 pan head (or similar) screws 2x M3x10 countersunk screws
this is a taller version of the NorcoT lid riser that I designed for additional cooling, it has the mounting corners By Michel Jubault included in the design, and the slat inserts have be resized for easier assembly.
Würth Adjustable Filament Spool Roller Introducing the Würth Adjustable Filament Spool Roller – When normal Spools are just not enough! Are you looking for a solution that can hold all your Spools? Whether its tiny sample spools or huge…
Printed with PLA BOM McMaster 8969T925 316 Stainless Steel Corrosion-Resistant Compression Springs. CAD file just for model, actual spring is 9.5 X 16 X .7 mm 6655K13 Thrust Ball Bearing 9414T6 Set Screw Shaft Collar 91847A429 18-8…
Elegant modular organizer for sachets and condiments, featuring a premium ribbed texture, smooth dividers, and a minimalist design that fits any kitchen or workspace. Printing Instructions No supports required. Set the Wall Generator to…
RECENT UPDATE: Modified tensioner screw cap and added shortened Lemonstruder pieces for durability and more range of adjustment I had a lot of trouble getting a K1C gear that could grip filament well enough for my rev E lemontron. I…
Designed for ventilation openings in windows and balcony doors. Diameter is 180 mm. Its adjustable structure allows it to be closed in bad weather. For installation, 1 × M4 bolt (the bolt length depends on your window modification;…
The OmniFlex Lamp is a fully 3D-printed, extremely flexible desk lamp based on a segment system similar to industrial loc-line hoses. Its greatest advantage is that it can be positioned in virtually any position and at any angle, and the…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) CUTE REINDEER WITH STABLE…
This headphone wall hanger is designed as a simple, sturdy, and customizable mounting solution for everyday use. Its minimal profile keeps headphones safely stored while saving desk space and maintaining a clean setup. The model includes…
Both the repistory of adjustable pusher and the corresponding manual for the Bolt OS select fire system
This is my V3 hand-launch glider , developed through multiple design iterations with a focus on real-world flight performance, stability, and ease of printing . Compared to earlier versions, V3 introduces meaningful aerodynamic and…
I designed this holder to mount the AquaEl Leddy Slim LED light underneath Ikea's Lack series products (tables/shelves). The design features a sliding mechanism, allowing you to adjust the LED light's position back and forth to your…
Overview: This Z-axis table is engineered to mount directly onto the Creality Falcon2 laser engraver frame, providing approximately 6 inches (150 mm) of vertical adjustment. This lift creates sufficient clearance to accommodate the design…
A stand to mount a regular 120 mm fan to, with adjustable tilt. Please note: The two "guarded" variants are meant to be sliced with a 120mm cylinder modifier that disables the top and bottom filled layers, thus leaving the infill pattern…
Parts Needed M8 Nut M8 Bolt Self tapping wood screws x 2 Print Instructions Pause at layer 192 to insert M8 Nuts
Detailed Description: This rod compass is a practical tool for marking large circles on wood, metal, or plastic. It clamps onto a profile such as a wooden strip or a spirit level and allows diameters from approx. 85 mm up to over 4000 mm…
Working on a big plane while it's resting on a table, being careful you don't slide it and damage them? Want a beautiful display to show off your hard work? Then worry no more, your solution is here! Make it taller, shorter, wider or…
This model is an MX‑G System Sprinkler Extension designed for easy integration into modular setups. It includes an M5 internal thread compatible with Festo QSM‑M5 pneumatic couplings or any similar push‑in connector. The design provides…
This is a simple extension for your roll-up label holder. It can be adjusted to four different heights, making it more space-saving. You just need 2x M4 head screws with a length of at least 40mm. And 2x M4 nuts. Use supports only for the…
Please consider leaving a review (with picture of your print), or a like. This really motivates me to keep uploading my models :) Description This adapter allows you to mount a standard 120mm fan to the ceiling with an adjustable tilt…
===================================== The Adjustable BrachyRack v201/2026 ===================================== Bar adjusts from about 4.25" to 6" tall and 4.25" wide to 7". ------------------------------------------- Suggested Print…
This project is a modular articulated phone stand designed for 3D printing . The construction uses multiple joints to allow flexible positioning of the phone while maintaining a horizontal orientation of the holder throughout the entire…
This adjustable headphone stand for desk is designed for anyone searching for a modern, minimalist headphones holder that works both as a functional desk accessory and a design piece for office or home setups. The model was fully designed…
Postcard Stand / Photo Holder with Stable Base Dimensions: 90mm wide / 40mm deep / 20mm high slot 16mm deep with a slight 5° angle slot opening 1.6mm ----------------------------------------------------------------------------------------…
Print the head strap in TPU and the the headband in PLA/PTEG/ABS. When inserting the yolk or rotating yolk into the headband, the put strap slips through the headband slot and around the center of the yolk.
This modern stand features a clean, minimalist design combined with excellent weight distribution , ensuring high stability even when used with a tablet. The carefully chosen angle and low center of gravity prevent the device from falling…
This is a set of cable ties. Loop over cable once on one end to keep the tie on, then loop again to hold the cable together. Available as a 10mm wide and a stronger 20mm wide version with a few different lengths. These are available with…
This is a set of straps You can use these to hold a bunch of stuff together like wires or use them for cosplay purposes, etc. You can fold these in many different ways for different tasks and combine them together in many other ways.…
I extended the arms on the lower part of the clamp, and changed a few other things to help it fit the Hadley strurdy mount. The upper part and the knob can be used from the orignal design that I remixed this from.
After purchasing multiple off-the-shelf Game Boy cartridge display stands, I found that most of them tip over easily once fully populated—especially when mixing original Game Boy, Game Boy Color, and Game Boy Advance cartridges. Rather…
This is an adjustable foot with about 1" of total adjustment. I made this so I didn't have to shove rocks or bark under campsite picnic tables to get my 17" Blackstone level. You'll want to print 4 pairs and will need appropriate length…
This is a custom adjustable stand designed for INSKAM USB microscopes commonly available on AliExpress. The stand provides much better stability and height adjustment compared to the original tripod, making it suitable for electronics…
Used for holding or securing items on round pipe / bar section I have to make a part to hold some covers on high grade stainless steel during a setup operation. These clamps allowed quick and easy securing. Made on Prusa mk4s with PETG at…
The openscad file imports the 113638 file by name, fills the old tang hole and then subtracts the new tang as described in openscad from the original *.stl handle. The openscad file is fully commented and parameterized, so the task should…
An adjustable chamfer jig to use with a router. Printed in PLA with 0.25 layer height. Use paint-on support on slider pins. Print two indexer's Use four M4x30mm + nuts to assemble
If you approach bed leveling as a more of a challenge than an irritation, this may be for you. This adjustable print bed standoff allows about 1.5mm of adjustment. The key is using a plastic which has a higher melting point than the…
[EN] Universal handle, can be used for any size. The handle consists of cleats and a bar. The 6-angle (Hex) bar can be printed on a printer, or you can use any tube or rod (wooden, aluminum, plastic, chrome, copper...) with a diameter of…
Easy print, Adjustable in two axis. Perfect for a low cost versatile label solution. No supports Recommend: Perimeters: 6 PETG
Adjustable leveling feet for a laser worktable Hardware BOM 1× M3 × 30 cylinder head screw or pan head screw 1× 693ZZ bearing 2× M3 nuts 3× M3 countersunk screws with nuts or 3 mm wood screws (depending on the material the feet are…
SOPORTE AJUSTABLE PARA GRÁFICA ALTURA MÁXIMA: 6,3CM ALTURA MÍNIMA: 4CM CONSTA DE 3 PIEZAS: -CILINDRO PRINCIPAL -ARANDELA -TORNILLO (SOPORTE EN SÍ) COMO SE USA: ENROSCAS LA ARANDELA EN EL TORNILLO Y POSTERIORMENTE EN EL CILINDRO. AJUSTAS…
