WinWing Orion 2 - adjustable foot extensions
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
my first attempt to add extension pieces to provide for a heel. As controls higher of ground, additional heel rests help
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 567
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I am working on adding a larger heel part soon.
The arms must be inserted into the inner sides of the toe arms on the WinWing Orion 2. They jus snap in.
The heel part slides in after that and can be fastened inthe preferred position.
PLEASE SEE IMPROVED VERSION HERE: https://www.printables.com/model/1584783-winwing-orion-2-adjustable-foot-extensions-wide
I have added the slicer files (I used PLA 20% fill width + supports+ perimeter 3).
I have also added the project file and the Fusion 360 source files.
Fasteners used are M4 Hexagon socket “cheese head” screws and nuts.
left or right arms must be mirrored in the slicer to achieve same anghles on each side!
The upper arm fit to the rudder works well but the rest could use some beautification. A wider heel (in progress) spanning across the width of the arms will look better and match the the wide toe pedal.
I hope winwing will come up with an accessory which will certainly be better but this may help in the meantime.