Liczymy pasujące modele…
A remix of Printojet's amazing design. Strong enough to be used without the front bar support with 2 sets of stiff springs. Bolt fork much stronger to cope with sudden joystick end-of travel bumps. Designed to have no flex with PLA <40%…
I am working on adding a larger heel part soon. The arms must be inserted into the inner sides of the toe arms on the WinWing Orion 2. They jus snap in. The heel part slides in after that and can be fastened inthe preferred position.…
Edit the sketch called "spline" to adjust it to your liking. It's best to just delete the constraints and moving the points with the move tool or dragging them manually. In the past, I've used a combination of plumbing tape and a felt…
PLEASE Like if you like & review and post your makes! Thanks! for the hinge you will need M4 hex socket screws and nuts (10 or 12mm) (for each foot 2 pieces) For the adjustable slider you will need m4 hecx socket screws (20mm) (for each…
A quick release plate to easily remove your joystick from your cockpit, adapted to the Winwing Ursa Minor. For those like me who have a single sim rig for flightsim and simracing: Driving with a joystick in between your legs sucks! So I…
A quick release plate to easily remove your joystick from your cockpit, adapted to the Winwing Orion Base. For those like me who have a single sim rig for flightsim and simracing: Driving with a joystick in between your legs sucks! So I…
I made this tall stand so that a 10" screen can fit underneath showing my gauges that I pull out from MSFS 2024. Category: Hobby
A quick release plate to easily remove your throttle from your cockpit, for the Thrustmaster Warthog and Winwing Orion. For those like me who have a single sim rig for flightsim and simracing: Driving with a Throttle hitting your elbow…
This will require using larger length bolts to accomodate the extra thickness of these mounts. I used the brackets to mount my FCU on top (using some brackets also included, but from: https://www.thingiverse.com/thing:6616069), note,…
This is a set of smoother cam profiles that reduce how rough and vague the stock centre detent is. The stock cam has a radius smaller than the bearings that ride it, causing it to jump the gap in the middle. That's what gives you that…
A remix of Printojet's amazing design. Strong enough to be used without the front bar support with 2 sets of stiff springs. Bolt fork much stronger to cope with sudden joystick end-of travel bumps. Designed to have no flex with PLA <40%…
Adjustable tilting mounts for winwing FCU. Mirror in your slicer for opposite side.
The included desk stands aren't very good. The unit is extremely wobbly when attached to the back, and it doesn't look good when attached to the sides, so I made this. It covers the EFIS unit port. Use the shortest included screws and…
Curved Winwing extension Assembly is easy. Place the nut on the extension, than glue the insert in place. Strong enough for force feedback. :)
I created this model to mount my Winwing FCU to my Honeycomb Bravo throttle. It keeps the FCU rigid and has a 15 degree upward tilt to make it easier to view. Print settings: 0.2mm Layer Height 20% infill 3 walls Print mount on its side,…
Create your own, winwing ursa minor desk mount. Hardware required (for 1 stick holder): 4pcs: 20x20 aluminium profile corner brackets 4pcs: M5x10mm screws 8pcs: M5x8mm screws 5pcs: M5x12mm screws (2 for winwing, 3 for toggle clamp) 12pcs:…
WinWing Airbus FCU Mount for the Ikea Skadis System → Mount your WinWing FCU and/or EFIS on a Ikea Skadis Wall for easy, clean Storage → Has a tight fit when mountig to the panel
I am working on adding a larger heel part soon. The arms must be inserted into the inner sides of the toe arms on the WinWing Orion 2. They jus snap in. The heel part slides in after that and can be fastened inthe preferred position.…
This modular system has been developed to allow you to mount your Winwing Joystick at different heights and positions based on your seat position. I developed this because I wanted to fly helicopters in DCS and MSFS but couldn't find a…
For me 1mm works perfectly, step by step instructions are in the pictures.
Edit the sketch called "spline" to adjust it to your liking. It's best to just delete the constraints and moving the points with the move tool or dragging them manually. In the past, I've used a combination of plumbing tape and a felt…
Hello all, I was unhappy with having the MCDU on my table or buying the OEM Table Mount from WINWING so I decided to design this. Hope anyone finds it useful. I am unsure if it will fit any other Hotas Table Mounts but this here is the…
Inspired by Der_Onkel:s WinWing MCDU Case https://makerworld.com/en/models/1108268-winwing-mcdu-case#profileId-1104378 MCDU Attachment is same kind as Der Onkel:s model, but redesigned to be mounted to aluminium extrusion Sim Rig. It is…
Made these to mount the FCU to a monitor arm for more options to mount. Works great and is made to fit Vesa 75x75 holes. Has wiggle room for printers and for easy adjustment to help it fit. Works with the 22mm screws that come with the…
Screen cover for the Winwing / WINCTRL MCDU – protects the display from scratches, dust, and sunlight. Designed for a perfect fit with secure hold and easy installation. Printed in flexible TPU with a hardness of 95A. Do not use PETG or…
screen cover for the Winwing / WINCTRL PFP 3N – protects the display from scratches, dust, and sunlight. Designed for a perfect fit with secure hold and easy installation. Printed in flexible TPU with a hardness of 95A. Do not use PETG or…
30mm = ~21cm of total travel 45mm = ~26cm of total travel Print settings: Walls - 12 Infill 30% (Cubic, Gyroid or Cross Hatch) Supports: On Follow the official instalation instructions, except pull out the cables from the throttle body.…
Long handles are not compatible with the original idle detent. I've included some experimental idle detents, but they do not work with the stock spring. If i push the handles down manually they do stop the throttle from moving past idle,…
Custom mount for the WinWing MCDU (airbus version). It fits a pretty common collapsible/foldable desk clamp on for example Amazon . See photo's for more details.
I wasn't happy with the way the SATA cable on my WINWING FCU+EFIS (pilot side) modules protruded, so I made this bracket to support the connector at the FCU side and also keep the cable itself in the channel. The EFIS side is shorter and…
Lets you removably mount the WinWing Orion 2 HOTAS system to a 15.5 mm thick desk. The joystick mount is printed in two parts, which can be joined using a 3mx20 screw and/or glue. The throttle mount requires two hex nuts and 3mx20 screws,…
If you own the WinWing FCU (with or without the EFIS panels on the side) you know that the WinWing stands that come with it are hardly stable for desk use (fine for mounting on a sim-pit rail). So I made stands that bolt on the same place…
Want your WinWing MCDU to sit on a desk at an angle different than the built in stand? Want to be able to tilt it? Yep, I did, sure it's not true to life like in the cockpit, but my desk is not the same as an Airbus cockpit either……
This remixes the excellent single 2U rack mount panel from Maurício and makes a 6U version with mounting holes for the WinWing MCDU and a spacer to allow it to sit flat without rocking. Like the original you need 6 M4x8 hex screws and 6…
Airbus pedals for Orion 2 rudder pedals from Winwing. The pedals are designed in three parts so that they can fit on smaller printers. All three parts must be printed again, mirrored across the X-axis, for the left side. Sixteen M6 insert…
I bought the PDC panel for my Boeing PAP3, and while mounting it, I noticed that the entire panel tips forward after installation. To fix this, I designed these small extensions for the original Winwing feet. The panels simply clip onto…
You may need to cut a small notch in the bottom of the front bit for the cable as your USB C cable mite not fit through the screw slot thingies.
Dustcover for the winwing URSA MINOR 32 Throttle Metal, 32 PAC Metal and 32 AGP Metal. Printed in TPU 95A to avoid scratches
Since we have cats that like to play with small cables, I designed this cable cover that can simply be clipped onto the sides of the 32 PAC Metal. It effectively protects the small connection cable. There are two versions: because I…
This simple Dust Cover for the WinWing Sim PFP 3N Flight Management Computer sits over the top of the screen and keyboard to protect it from dust and damage when not in use.
Remixed the mounting hardware from the Thrustmaster model and adapted it for the WinWing Ursa Minor Airliner stick Made a little shorter in the Y axis to fit on my 230x230 print bed. Filled the original holes that aligned for the…
I wanted to mount my MCDU to underneath my desk because I have limited space on top of my desk for my MCDU. I also have a really crappy desk I don't mind drilling into. this mounts directly to the included mounts included with the MCDU. I…
Winwing / WINCTRL Mounting Bracket Stand for PAP3, FCU / Tab A9+ or other 11″ Tablets – 3D Printable Model This 3D-printed mounting bracket is designed to hold two 11″ tablets - such as the Samsung Galaxy Tab A9+ shown in the images -…
Fits 10-series (1020) aluminum extrusion rail. Uses the 18 mm M5 bolts that come with the device to attach it to this mount. Prints cleanly in PETG or PLA; recommend 4+ wall loops for strength. Attaches to the rail with 3/4" M5 screws and…
This support can be attached to the Winwing\Winctrl Throttle Desk Mount5 but can work with any 2040 profile. Printed used PLA with a Creality K1C 2025. Infill does not matter, but use at least 3 wall loops to have a bit of stiffness.
As an avid flight simmer with a physical disability, which greatly affects my finger and hand dexterity, it was difficult for me to advance and reduce the thrust levers in unison. This simple print clips over the thrust levers so that…
This is a modified version of Mark Ayton’s excellent EFIS Knob. The back has been lengthened to make the knob easier to rotate. The mounting hole on the bottom has also been resized to fit the Engine Mode Selector post on the throttle…
PLEASE Like if you like & review and post your makes! Thanks! for the hinge you will need M4 hex socket screws and nuts (10 or 12mm) (for each foot 2 pieces) For the adjustable slider you will need m4 hecx socket screws (20mm) (for each…
A quick release plate to easily remove your joystick from your cockpit, adapted to the Winwing Ursa Minor. For those like me who have a single sim rig for flightsim and simracing: Driving with a joystick in between your legs sucks! So I…
A quick release plate to easily remove your joystick from your cockpit, adapted to the Winwing Orion Base. For those like me who have a single sim rig for flightsim and simracing: Driving with a joystick in between your legs sucks! So I…
I made this tall stand so that a 10" screen can fit underneath showing my gauges that I pull out from MSFS 2024. Category: Hobby
A quick release plate to easily remove your throttle from your cockpit, for the Thrustmaster Warthog and Winwing Orion. For those like me who have a single sim rig for flightsim and simracing: Driving with a Throttle hitting your elbow…
This is the front panel for the WinWing glareshield for the A320. I combined the available resources and created a front panel for the housing from JimmyB-UK . All the information needed to create it can be found in the individual linked…
A quick release plate to easily remove your joystick from your cockpit, for the Winwing Gemini. For those like me who have a single sim rig for flightsim and simracing: Driving with a joystick in between your legs sucks! So I…
The standard rubber ring creates a snack on your joystick, I replaced it with one printed from PETG and now there are no snacks.
a version for people using the Winwing/ WinCTRL throttle mount (like myself)
There are two parts for easier printing. Secure the two parts with 3 M3x5mm bolts. You also need a 4.8mm cube magnet. Print at .1mm or .15mm layer height. I've supplied the STEP file in case you need to make adjustments.
A mod for the MAN RNG dial on the WinWing throttle. The dial has been enlarged and it's much easier to rotate. The center hat can still move freely. You must remove the existing dial (by carefully prying it out), and put this in. Print…
Winwing Takeoff Panel 4080 aluminum profile mount using M8 bolts and 15mm heads. Printed with Sunlu Black PLA on and Ender 3 S-1. 4 wall lines and 40% Infill worked for me but can be changed to taste.
Playing in VR, I found that I had to remove my hand from the throttle to reach down the slider so I made this extension. It's not a replica of the nozzle lever but I angled it to the right so it doesn't hit your thumb when you have them…
Attaches with double sided tape. At default scale it's 0.5mm clearance. Depending on your printer scale to: 91-94% = 0.1-0.2mm clearance (calibrated printers) 96-98% = 0.3mm-0.4mm clearance (most printers) 100% = 0.5mm clearance (for the…
Mechanical, threaded adapter to attach Thrustmaster grips to Winwing Orion2 base. Can be used with FS Projects Airbus sidestick grip. Wiring needs to be modified to change from 6 pin mini DIN to 5 pin mini DIN. Picture of wiring (found on…
Alternative Cam profile for Winwing Orion 2 joystick base. Cam includes a soft centre detent and a more linear movement force than the standard Cam. Not quite as smooth as the polished metal cams, but I can't feel difference in use. Print…
FCU came and fits right in as first picture shows. ——————————————————— I did pre-order the upcoming Winwing Airbus FCU and then started to wonder how to attach it to my rig. Best place would be under monitor on the right side and thought…
In the F-15E/EX grip the problem isn't the TDC itself, but the big shaft. I've slimmed it down to only 1mm and extended it by 3mm for more precision. Increases the range from 50% on the Y axis and 70% on the X axis to 100% on both axes.…
Simple Wall spacers to keep the WinWing Rudders far enough away from the wall and prevent side slipping. Works with or without the winwing mat on carpet.
A plate that allows for mounting the WinWing Super Libra Joystick Base to a 4040 or 8040 aluminium extrusion profile. Updated 28th Oct 2019: Verified hole pattern against the manufacturers published 3D files, dimensions match perfectly…
A small bracket to mount the upcoming WinWing Hornet HOTAS throttle to 8040 aluminium extrusion profiles. Based on WinWing's technical drawings from Facebook. Edit Oct 28th 2019: Verified dimensions against WinWing's 3D cockpit design…
This is two brackets to attach the Winwing A320 FCU unit to an Honeycomb Alpha or Bravo. It also can be placed partially under a monitor stand to hold the unit in place. Let the user push and pull buttons without any problems. It also…
