Winwing Orion 2 Throttle FingerLIFT mod.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fingerlift that actually requires you to lift it. With ergonomic handles.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 1177
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
Long handles are not compatible with the original idle detent. I've included some experimental idle detents, but they do not work with the stock spring. If i push the handles down manually they do stop the throttle from moving past idle, so stronger springs might make them work. Original springs: 0.5mm dia, 15mm lenght, 5mm width
Print orientation:
Print settings:
Walls - 5
Supports - on
For the detent, pick the lowest size that stops the throttle, so you can push through them with considerable force.
Some users had concerns about it and/or the polymer handles breaking, i couldn't get it to break, just respect the recommended print orientation.