Winwing Orion 2 Throttle FingerLIFT mod.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A fingerlift that actually requires you to lift it. With ergonomic handles.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 81
- Makes
- 0
- Views
- 1,200
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
Long handles are not compatible with the original idle detent. I've included some experimental idle detents, but they do not work with the stock spring. If i push the handles down manually they do stop the throttle from moving past idle, so stronger springs might make them work. Original springs: 0.5mm dia, 15mm lenght, 5mm width
Print orientation:
Print settings:
Walls - 5
Supports - on
For the detent, pick the lowest size that stops the throttle, so you can push through them with considerable force.
Some users had concerns about it and/or the polymer handles breaking, i couldn't get it to break, just respect the recommended print orientation.