Counting matching models…
This fidget clicker is a neat little gadget showcasing the power of print-in-place mechanisms. Choose between three detent strength options. Simply print the desired model, break it free from the bed and with minimal cleaning up, its…
Custom afterburner detent for Thrustmaster HOTAS Warthog throttle. After installation there is no need to rise throttles to pass afterburner activation point. Simply push throttles over instead. More information here:…
In case you don't want to file a detent pin round for your super safety switch, here is a working solution. I printed it on a resin printer with 0.05mm resolution. Feel free to share…
This is a replacement detent arm for Ford F-150 trucks built from 2009-2014 that shift gears using a floor shifter / console shifter. The original Ford part is very fragile and can easily break when the gear shift assembly is being…
Tippmann ball dente seams to be working fine after 50 shots i used saint smart tpu , so print with a medium hardness tpu
Detent plastic hinges More part numbers and CAD formats on www.traceparts.com/goto?Product=90-18062018-053028
This is a modified shroud and pump for the Orion Blaster Lynx, Minx, and Lonx 2.1 beta to add a ball detent. This locks the priming grip in the foward position so it doesn't move around easily. Uses a 6x7mm ball detent, the same kind that…
Very simple 38 / 357 speed loader that actually keeps the bullets aligned, actually has a detent, and actually fits without getting jammed at an angle. - Uses a single M4 screw between 10 & 30mm long. - 20-30g of filament depending on…
I made the detent more pronounced, and reduced the pressure on the nubbin so that it doesn't rub on the part until it comes in contact with the detent. Snaps snuggly into the throttle slide, with no need for additional supports on the…
this is a remix of thing:4915344 , the wheel does work OK as in the original design , but the detent part doesn't fit on the Voxelab Aquila's Y-carriage plate on it's power-side (back left), though there's another remix that already fix…
Remix adds detents for the 10 round Pmag. Belt clip was shortened to work with a 1.5" belt. Print in the default orientation, use organic or tree supports. Highly recommend 3 to 5 walls depending on your nozzle size.
There is also a model with deeper grooves available, although it may require some breaking in / sanding in order to function smoothly. PRINT SETTINGS Printer: Flashforge Adventurer 5M Layer Height: 0.2mm Wall Loops: 3 Filament: PLA…
Detent and other parts used in the box drum video below: Provided in STEP and Fusion 360 archives. For reference.
My Black Diamond headlamp had a bracket with two fingers that let the tilt adjustment click into place. The fingers broke off and the light would flop down. I used scotch tape to hold the angle for a couple years. Then I printed a TPU…
NOTE: This model is not optimized for 3D printing. This is intended only as a reference, thus only .step files are provided. .f3d file available upon request.
I found it impossible to set up good Airbus style CLB + FLX/MCT + TOGA detents with the stock STECS detent pieces so I designed this custom piece that adds three identical and equally spaced detents. Print with 0.2mm layer height and 100%…
These were specifically design to replace the drawer slide detents on a Kennedy toolbox. The original pieces become brittle over time and will fail. They will likely be a little tight at first and get better with use. Print Settings:…
Instructions: NOTE* IF PRUSA DOWNLOAD ISN'T WORKING, GO HERE: https://www.thingiverse.com/thing:4246175 https://grabcad.com/library/prusa-covid-19-coronavirus-face-shield-with-integrated-folding-detent-strap-1 UPDATE 13/04/2020: NEWEST…
This mod mimics the A320 detents. I included the .step files in case you want to rearrange the detents or improve it. If the parts aren't fitting in the base part, sand it down, lower the flow rate or scale the base part by 0.5% in its…
This is an adjustable detent mod for Thrustmaster T16000m FCS. I designed this to have the following features: Adjustable detent position (center detent for full-range throttle, afterburner detents, etc.) Easy to remove and re-apply…
Description: (Introduction - The Problem) Is the gear shifter in your Ford F-150, Expedition, or Lincoln Navigator feeling loose, sloppy, or missing that satisfying "click" when you move it between gears (Park, Reverse, Drive, etc.)? Did…
While setting up my Thrustmaster Warthog for playing Elite:Dangerous I realized how dependent I was on my old HOTAS center detent for dropping the ships to zero throttle reliably. In looking around, I couldn't find a good, free throttle…
This is the part that keeps the paintball from rolling out of the barrel while it is waiting to be fired. original part is made from rubber, so Flexible filament is recommended. Rigid prints will bust every ball, I expect, so that could…
Adds a detent to the X-55 left throttle. The device can be installed and removed easily. Note that this will add friction to the throttle. There are two detent pieces, one with 75% throttle (for afterburner), and one with 50% throttle…
In addition to the original BOM, you will need two compression springs, a few M4 screws and nuts, and M3 square nuts (optional).
This this a replacement for Fluke part # 646679. It's the detent spring that gives the dial its click and locks it into each mode. This part was broken in my Fluke 77 Series II so I designed a replacement. It's not an exact copy of the…
This turns the mag adapter on the Nexus Pro into a detent system allowing for mag swaps without needing to touch any levers. I kept hitting the Maxwell release instead lol ENJOY! :) INSTRUCTIONS: Print the parts in the orientation shown.…
Re-make/re-mix of @VikKon's Magnetic fidget toy – I didn't have the correct size magnets, and wanted the magnets oriented face-to-face rather than edge-to-edge. Otherwise the model is mostly the same style. Uses a 608 skate bearing, and…
Fits all the detent tools required for transmission detent servicing on a ZF 320G-S5D manual transmission. Uses (4) 15mm x 3mm neodymium magnets; Readily available on Amazon. You MIGHT be able to get this thing to stick vertically, but…
Basic center dentente for the Thrustmaster T16000m throttle Print instructions Needs 2x 2x10mm Circular Magnets 2x M3x12mm Screws
low effort front for lynx 2.0 to use a 6x7 ball detent (same as traceur, alchemist, cynthia, etc) to keep the pump grip forward. Keeps it forward even with aggressive wiggling and jumping with a worker vertical grip. amazon:…
tippmann ball detent PETG Ver
Replacement hardware for a bug deflector that attaches to a car hood ( https://www.amazon.com/Hood-Protector-Ehiltek-Deflector-Particles/dp/B0CTQGDVY6 ). I recommend printing the clips with a material that can withstand a lot of heat. I…
I threaded the holes for the ball spring plungers(M4x0.7) so no need to tap them, also made the hole wider to accomodate the screw head for the M3x20 screw. I have included the blender file, and an stl. Print Settings Printer Brand:…
The ball detent mechanism allows you to build rotary switches that “latch” to specific positions. You would normally find this in all kinds of rotary switches like fan regulators, for example. This model provides six detents, which means…
I designed and build a desktop cockpit for the Aerosoft Airbus in FSX and had the Hotas X as my stick and throttle. It has a detent in the middle but it is nowhere near where the throttle needs to be for the Climb or Flex setting that are…
Detent plate for the Virpil CM3 throttle, featuring idle lockout (lift to off, pushthrough to idle) and afterburner detent (pushthrough to on). Idle detent takes up 10% of Axis range, afterburner 25%. Pushthroughs require slightly more…
Press Like for encouragement. Comment for improvement. This system add detent marks to the Virpil WarBRD base. I designed them to get a tactile feedback when the stick wanders outside of the normal flight envelope of the aircraft.…
I could not find any good fingerlifts for the V1 version of the vpc throttle so I decided to design my own. It includes a gated idle cut-off which requires the fingerlifts to be lifted to get it from idle to cut-off and a afterburner…
While there are a few other options for a afterburner detent for the TWCS throttle, none worked quite how I wanted, so I made my own and decided to make it public. It's a pushthrough model, meaning you have increased resistance at the…
Have fun, looking forward to comments.
Thurstmaster HOTAS wtih Airbus Detentes. Idle/rev idle, CLB and FLX. To match Airbus throttle stack.
Simple locking detent disk pair to be used for projects where a rotating arm or plate needs to be locked into place after positioning. Included in the model files are example prints along with the male/female keys and detents. You'll need…
Flap detents for Condor 3 soaring simulator for the VKB stecs throttle
Ehdrien's Gecko blaster is definitely an amazing blaster, but it's not perfect. The slide lock on mine has busted multiple times, so when I saw Trevor's Dante Blaster , I got inspired and tried to apply their method of using ball detents…
The help avoid having the spring go boing, or to re-install it after this happened.
Hi folks! This is a very simple add on detent for the CH Pro Throttle. I designed this because I've been playing Falcon BMS a lot and with 4.35 I had a lot of trouble knowing when I was in burner. This detent is just a push through, no…
Designed to be printed in TPU at .12 - .15. Fits snugly in automag twistlock barrels.
Follow this reddit guide on how to add the ball detent to your Smiley. The regular file is for the plastic arm and should lock into place based on the photos he provided. The template file is for you to hold over the metal bolt arm to get…
The Black Diamond Spot 2009 Headlamp has a design flaw where plastic detents can easily break off. This then renders the headlamp a floppy and ineffective tool. To restore detent functionality where you can once again adjust the headlamp…
This is a detent for the Virpil VPC MongoosT-50CM3 Throttle made for Star Wars Squadrons (SWS). In Squadrons you spend a lot of time going from full throttle to zero throttle (and a few times in the middle) very rapidly and almost…
PRINT SETTINGS Printer: Flashforge Adventurer 5M Layer Height: 0.2mm Wall Loops: 3 Filament: PLA Infill: 20%
Ball detent for Valken and Milsig M17 M5 and CQMF markers Print in flexible TPU, simples. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2mm Infill: 100% Filament: Any - its all the same TPU…
Add a detent to you CH Products Pro Throttle to turn it into a forward backward throttle. There are 2 versions with different stiffness, pick one depending on the filament used and resistance you want. I printed mine in PETG, TPU 95A was…
This is designed to attach to a chair mount between my armrest and the throttle but you could attach it to any 4080 extruded aluminum structure or lay it flat on a desk. The holes between the detents can be used to store spare screws and…
(2) versions of the detent cover to cover the variable conditions of some detents out in the wild.
Remix of SuperFrodo's magnetic detent for the TWCS throttle. Made for 2 5x5x5mm magnets that you can get for cheap on AliBaba. Update : The cheap Alibaba magnets aren't enough make it even slightly "grip" to a position, it depends on the…
Replacement Detent Pin for Baratza Encore coffee grinder (legacy model). This part is out of stock on Baratza's parts website. I'm unsure whether they stopped producing it because of the grinder's age. It goes under the grinder's…
Two simple parts to print. Print the one with bosses orientated as shown in the photo. You will need a 8-32 x 2" SHCS, an 8-32 thin, self-locking nut, a pair of 5mm diameter balls preferably steel or stainless steel, a pair of .187" OD x…
Left lever - Airbrakes : Detent for Airbrake lock in the closed position mimicking real glider airbrake command behavior Right lever - Flaps : Detents matching flaps levels of the AS33Me, tested on the Got Friends version on MSFS2020.…
Printed in TPU filament. Glued in with Gorilla Clear contact adhesive.
ball detent lower. uses a 6x7mm that is recommended to glue in but to not use too much glue. follow normal print orientation as normal.
I made the text easier to paint in Bambu Studio
So, I got a BT4 rental paintball tracer which had been store for 20 plus years, all the orings where gone and the ball detent literally desintegrated in my hand. I cleaned it up, changed the orings, oiled it up and it was working great,…
This is a two screw Kingman Spyder Compact 2000 detent holder. It may fit multiple models of Spyder. I hope this helps fix an older marker. I print it rotated 180 degrees so the top looks better. And use supports touching the build plate.…
Compatible with priming brace
Model originally by Oripash on thingiverse. Licensed under GNU-LGPL. I modified this model in Blender to remove a tiny pin that prevented the model from slicing correctly without the error “there is an object with no extrusions on the…
Since Virpil apparently does not make the detent plate in the CP2 to the same standard as their joystick cams, but apparently lasercuts it without finishing the surface, the original plate is relatively rough and does not quite give quite…
Developed this part for a co-workers clutch spring detent in his mk2 VW Jetta. This is the 6th and nearly finished version. He unfortunately no longer has the vehicle so we weren't able to finish it completely. The outer cylinder needed a…
This is my Welcome to detention sign, perfect for troublemakers!, if you want a colour for the words just change the layer colour change slider, no supports needed.
While building my simpit I found I wanted to be able to easily integrate the TWCS throttle I had on hand. I used the original model as a base and removed as much as I could. What was left is a simple box that can easily be fit into a…
a single 6X7mm ball detent, glued in. can get on Amazon or Out of Darts
Intimidator ball detent. I designed this for my gen2 2k2 Bob Long Intimidator. I printed them out of TPU 95A on a bamboo. Works with Spyders too.
5mm detent block and PT spacer for Silly's Alchemist Blaster, Takes 5mm ODx7 mm long ball detents. Spaced by default is 5 mm tall, scale down appropriately. My print has 3 mm room for PT to move slightly. Placing the spacer will eliminate…
This is model made by me, but inspired with some mod, that I saw on reddit photos, but never found a 3D model for. It uses an existing mounting points in Thrustmaster TWCS. I've switch places for two screws from base plate to fit the…
Refer to here for instructions:
A quickly reverse engineered model of the black plastic button for the spring-loaded detents on a set of “Garden Pro” telescoping secateurs. One of the two black buttons broke off and needed to be replaced. It should be possible to print…
Modeled this from another 3D printed detent. Fits in my Gen 4 Micromag body, haven't tested with a roll pin/spring yet.
Flaps detent system for Virpil CDT VMAX (haven't tested with Prime). You will need need: 1 Hex Socket Spring Ball Plunger M5x12mm (Or M5x10) 2 Screws M3x6mm countersunk. Tapping kit (M3 and M5) - optional Assembly: - Remove Rubber handle…
I bought an Adjustable Work Platform from amazon: https://www.amazon.com/dp/B07P5L9D25 Adjusting the legs suck because there's 7 detent holes on each legs so going from the lowest to the highest position is a pain These detent override…
Magnetic Detent Fidget Coin A compact everyday-carry (EDC) fidget coin built around a simple idea: as the two halves rotate against each other, embedded magnets snap past one another and create clean, repeatable detents — a soft, clicky…
We bought a Rival 1042 Food Slicer for $5 at a garage sale. When we attempted to use it, we quickly discovered that the thickness knob kept moving around when in use. I took it apart and I assume something is broken or missing inside it.…
A unique 3D printable creation — this Sliding Fidget Bar, Print in Place, Dovetail Track, Click Detent Mechanism Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - PLY File -…
Normcore 58mm Blind Shaker Detent for Fellow Opus 1 & 2 Centers blind shaker under the grind spout of the Fellow Opus 1 & 2
Ball bearing slider detents that keep the drawers locked back. Replaces kennedy part #87599 Print with high infill TPU 95 Donation Link (not required)…
Free N scale 1:160 version of a working railway turntable. A key crank turns a 12-tooth pinion that drives a 102-tooth ring gear under the bridge (8.5 crank turns for a full circle). The ring has 12 V-notches, one every 30 degrees, and a…
Replacement Detent Pin for Baratza Encore coffee grinder (legacy model). This part is out of stock on Baratza's parts website. I'm unsure whether they stopped producing it because of the grinder's age. It goes under the grinder's…
This is a two screw Kingman Spyder Compact 2000 detent holder. It may fit multiple models of Spyder. I hope this helps fix an older marker. I print it rotated 180 degrees so the top looks better. And use supports touching the build plate.…
Remixed to have a detent to spin with index finger
Since Virpil apparently does not make the detent plate in the CP2 to the same standard as their joystick cams, but apparently lasercuts it without finishing the surface, the original plate is relatively rough and does not quite give quite…
Honeycomb Storage Wall Hot Wheels Holder with wheel detents.
yeah its just quiver if it were worse https://www.etsy.com/listing/1722696789/v3-pro-quiver-series-3-talon-mag-carrier 2 detents recommended if you run the mags upside down https://www.amazon.com/dp/B08SWDZ8ZG
Replacement for detent detail used on seat cushion of Hanspert™ couch. Tried on Amanda and Loren (on the photo) series.
First Strike Detent for T15, FSC etc. Print in TPU, well tested by me with both round ball and FSR, super reliable and long lasting
This is an inexact replacement for a Magpul MBUS 2 front sight that I made after I broke mine. I printed it with a 0.2mm nozzle. Do whatever settings you need to use, I did 2 walls, no supports necessary, orient the flat side onto the…
I couldn't find detents anywhere so I modeled them myself. Print in TPU, the softer the better. 2 walls, no infill, low layer height, top shell thickness set to 0mm
If the little plastic piece that makes your Herman Miller Vantum headrest "click" into place has broken or gone missing, this is a replacement. It's the part that sits between the headrest and the stem, rides the toothed rack inside, and…
Magnetic Detent Fidget Coin A compact everyday-carry (EDC) fidget coin built around a simple idea: as the two halves rotate against each other, embedded magnets snap past one another and create clean, repeatable detents — a soft, clicky…
Beta remix of the Detent UMP 11/9 Micro by 404logicnotfound. Applied the modifications to the micro version of the Detent UMP 11/9. All other components unchanged. I instead used shorter 14mm ball detents so it stays flush with the bump…
Most DIY encoders feel cheap and flimsy. This concept model was designed from the ground up to provide a heavy, premium tactile detent using opposing magnetic forces rather than grinding mechanical parts. By utilizing a standard 608…
