E46 ZF 5-Speed Transmission Detent Tool-tray
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fits all the detent tools required for transmission detent servicing on a ZF 320G-S5D manual transmission.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 70
- Makes
- 0
- Views
- 990
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Fits all the detent tools required for transmission detent servicing on a ZF 320G-S5D manual transmission.
Uses (4) 15mm x 3mm neodymium magnets; Readily available on Amazon. You MIGHT be able to get this thing to stick vertically, but they are really there to keep it in place in a drawer.
Prints in about 2 hours on a Bambu X1-Carbon. I used Bambu Carbon PLA, but printing in PLA should be just fine.
The tools fit VERY snugly, but shouldn't “snap” or be forced in. You may have to adjust inner/outer wall speeds and/or layer thickness to make it a closer/looser fit.
If there is enough demand, I can always optimize the model and reduce the printing time and amount of filament required. But, this was a quick design so it wasn't really a huge concern for me.