Search results: 5th

Amazon Echo Dot 4th & 5th Gen Stand / Holder

0.2mm Layer hight 20% infill No Supports needed

5th Pocket Small Handcuff Key

Saw Oakblooms and it reminded me of another handcuff key I saw once. Took his added a ring and made it smaller so it could fit in a Fifth Pocket or hidden somewhere else. I'm going to try and make some more variations of this. Please if…

Toyota 4Runner 5th Gen - 3.5" Dash Speaker Mounts

These mounts allow the replacement of the stock dash speakers with 3.5" aftermarket speakers. I designed these around the Infinity Reference REF-3022cfx 3.5" speaker - compare your speaker specs to these to see if the mount might work for…

Center console drawer for 5th-Gen 4Runner

Printable drawer for bottom cubby in 5th-Gen 4Runner center console. Supports recommended for the pull handle only Recommend adhesive-backed felt on the bottom and rear corners for best fit. RAM ball variant available here:…

25th Anniversary Badge made for Red Bull Rampage

Just another stylish badge this time created from the official Red Bull Rampage 25th Anniversary logo 😎. Other badges that you want: Logo Badge made for Red Bull Rampage A badge created from the official Red Bull Rampage logo for all the…

5th Gen 4Runner Accessories

All files are uploaded in .3mf formats only. You can get separate the individual bodies as needed from this file. Source files are not available due to IP theft prevention. You can request modifications in the comments if necessary. All…

5th Gen Toyota 4Runner Mini Cubby Drawer

For those of us with a 5th generation 4Runner, you know that little cubby space by the shifter is not very useful, because stuff flies out. I made a little cubby drawer that will fit in that space, that is held in place by friction. This…

Doctor Who - Tardis 13/14/15th Doctor EXTERIOR 2018-23 NO SUPPORTS and GLUE

⚫ Tardis 13th Doctor ⚫ I decided to update this model and redo it from the ground up. I wanted it to be more accurate and colorful and completely without supports. I think it turned out beautifully! More Daleks updates coming every…

Orthanc, Tower of Isengard for Echo Dot 4th / 5th Gen

Orthanc, Tower of Isengard from the Movie "The Lord of the Rings". It is a decorative Stand for Echo Dot 4th Gen. Suitable Device: Echo Dot 4th Gen: https://amzn.to/3eIkdu4 How-To-Print: Recommended Layer Height: 0,3 mm Support: No…

Echo Dot 4th & 5th generation wall mount

This is a wall mount for the 4th and 5th generation Echo Dot, which can be mounted with two screws. The device fits tight into the mount, the light ring at the bottom remains visible and there is enough space for the power plug. The…

Bases for Elemental Stones (The 5th Element)

If you print the model and show it off, please tag me on Instagram: @ca.lu_creation These are custome designed bases for the amazingly modeled "Elemental Stones" by Imirnman from the movie "The 5th Element":…

Owlbear through the ages- 5th edition D&D

A recreation of the 5th edition Owlbear. I don't know why it is purple. Finally done with one from every edition, only two owlbears left. I am starting a patreon Owlbears through the Ages Toy that inspired the Owlbear "Chinasaur":…

Blower air intake cover for Ryobi P755TH

Prevents things (usually my pants or shirt) from getting sucked into the air intake. Snap-in fit, removable Suggested print settings: - 0.20mm QUALITY - Prusament PETG (pictured using OVERTURE PETG Grass Green ) - Infill density 20% -…

iPad Air 5th Gen Case

Was having trouble ordering a case for our iPad air at work, so I decided to model one in Fusion 360. I also included VESA spaced mounting holes, in the event we wanted to add accessories to the case.

Kindle Paperwhite 5th (11th gen) case

I printed it from PLA, and it is a tight fit, but it works. I'm also planning on printing it in ABS too, because it is less rigid. TPU would be the best, but I don't have that for now. I recommend drastically reducing printing speed…

5th Gen 4Runner cup holder insert

Update: Fixed slope on top of cup holder to better print upside down; the original model has stringing around the inner rim due to the gradual slope. Original model is great, but needs to be larger to fit. The model in this post is 101%…

5th Gen Ipod Classic/Video Thin Back plate Reference CAD Model

This is a reference cad model I've made of my 5th gen ipod classic shell, headphone jack, and hold switch. It's about as accurate as I can get with just my eyes and calipers, though there could possibly still be some issues I missed. The…

Sci Fi Movies - The 5th Element - Leeloo - 1997

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Mini Leeloo - 5th Element

If you like this kind of stuff please check my Patreon page www.patreon.com/wekster also check out this cool diorama for it https://www.prusaprinters.org/prints/107536-diorama-for-mini-dudette-figurine-not-included

Apple TV 5th Gen Remote Holder for Under Table or Wall Mount

Overview Hi everyone! This is a simple model I made that allows the Apple TV 5th Gen remote to be mounted to a table, wall, or anywhere else you can think of! It has two countersunk m4 holes to allow it to be screwed to something. I…

Camaro Vent Gauge Pod (5th Gen 2010-2015)

Fits virtually any 52mm (2 1/16") gauge that uses the traditional ‘U' bracket for retention. Gauges with threaded bodies (like Equuis) are not guaranteed to fit or be tightenable. Has a 14x15mm passthrough on the bottom side to allow…

Teotihuacan Deluxe Master Set Insert / Organizer - Fits 5th Player Expansion

This is an insert / organizer for the Teotihuacan Deluxe Master Set, including the fifth player expansion. It supports premium sleeves (Dragon Shield matte shown in the photos), vertical storage, has no lid lift, and was designed to aid…

5th Gen Toyota 4Runner Cellphone Holder

The 5th gen 4runner has been in production for a long time and dont have a normal spot for phone especially a big one. it always ends up falling or getting stuck somewhere so i made this to help. Designed to printed without supports so…

iPad Air 4th 5th gen bumper frame ultra slim

The bumper fits 4th & 5th gen iPad Air. All openings fit buttons and slots perfectly. It should also fit 10.9“ iPad Pros but some buttons and slots may not fit perfectly. The back frame is tall enough (2.6mm) to protect the lens. The side…

5th gen 4Runner Red Bull cup holder insert

To be used with factory rubber inserts, the insert for the 12 oz can will work just fine with the 8.4 oz can. If you like the better fit and are exclusive to the 8.4 can print the one for 8.4.

Talisman 5th Edition Base Game Organizer

Conceptually inspired by insert to Spartacus (https://www.thingiverse.com/thing:2979444), but except minis tray drawn from scratch. My first bigger model, could be more optimized, but it did not exist 24hrs ago, and MVP is more than good…

6-5th century BCE silver coin from the Greek city of Cyrene : Silphium and Magas

6-5th century BCE silver coin from the Greek city of Cyrene : Silphium and Magas

Kindle Paperwhite 5th (11th gen) case TPU better print

No problem with printing speed 50-80 mm/s, possible to print much faster close to 100/140 mm/s with little quality degradation. 3mf file for Orca Slicer Printer: Bambulab X1 Layer height: 0.2 mm No support, no brim Temp: 220/20 C Bambulab…

5th Element

Stones from the 5th element

Toyota 4Runner 5th Gen Vent Solution

Toyota 4Runner 5th Gen vent solution. Off road your 5th Gen 4Runner without a stock bumper? Finding the interior dusty after a day on the trails? The vent solution is for you. Print a diver and passenger side cover. Glue them to the stock…

Ipod 5th Gen Video 60G Minimal Case

As you all know, ipods are the slipperiest devices on planet earth, and i liked icomputer7's bumper case. Thin, unobtrusive, but the back of it was prone to breaking off because of a weak point in the walls where they connect to the base,…

Twisted Wonderland 5th Anniversary Blazing Jewels Uniform Keys - Twisted Wonderland - MSLA ONLY

All the outfits look so good! Each character has one NRC key and one dorm key part of their blazing jewel uniform. These models are designed for a MSLA printer. Print in resin! COSPLAYERS PRINT AT 125% to make the keys pop against the…

Dune imperium 5th/6th player pack.

There are numbers next to the model for how many of each you have to print. This assumes both the Rise of IX as well as Immortality expansions. A suggestion for playing with more than 4 players - how to get an extra starting deck? We put…

Darth Maul Mask. 25TH ANNIVERSARY of THE PHANTOM MENACE

Darth Maul Mask made in Blender. Paint masteclass for 3D Printer Party 2024. 0.2 mm layer 5 to 15 % infill Supports on teeth and nose. Horizontal expansion is recommended -0.05 to -0.08 Use flexible band and sponge protectors. Heat the…

Buck Rogers in the 25th Century - Col. Wilma Deering - 1979-1981

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

ALEXA ECHO DOT 4th / 5th GEN STAND

Print 4 legs 1 top sphere and 1 bottom sphere. Glue the bottom sphere with the legs first and then, glue the top sphere on the legs. Be careful, on the bottom it's written “FRONT” just to know how to assembly the sphere with the correct…

Happy 75th Birthday cake topper

I printed in silk PLA. To give an idea of scale - legs are 5 cm tall and birthday is about 8 cm long.

Echo Dot 4th or 5th Generation Wall Mount (remix)

This is a wall mount for Amazon Echo Dot 4th or 5th generation.

Echo Dot Stand 4th/5th GEN

4Runner (5th gen) Rear Dashcam Mount - for Thinkware U3000

This is a remix of Pappadakko's redesigned dashcam mount for the 5th-gen 4Runner to work with the U3000 rear camera. I printed it in ABS to help prevent warping from heat in the summer. I recommend installing the camera on the…

Minimalistisch IPad 5th Gen (2017) IKEA Skadis Halterung

40% Infill 5 Top Layer, 5 Bottom Layer

dryad for dungeons and dragons for one of the 5th edition expansions DND

Important Note: Dryads in D&D 5e are Fey creatures and have a Challenge Rating of CR 1, meaning they are more powerful than a 1st-level PC. If you want to play as a Dryad, your Dungeon Master (DM) will need to adapt their stats to match…

MakerBot Replicator 5th Gen & Replicator+ Spool Holder / Adapter

I made the lip taller to hold the spool better. Everything else is the same. Printed on a MakerBot Replicator (5th Generation) with a raft, no supports, a 0.2mm layer height, and 25% infill. Printed with Inland purple PLA. This is a remix…

iPad 5th gen (A1822 & A1823) wall mount

Wallmount for iPad from 2017 (5th gen) WARNING Do not force it on when screen-protection glass is mounted, it may crack. Make sure to clean supports or it may damage the ipad.

5th gen 4Runner Yeti cup holder

Should print fine without any supports. I used PETG for mine.

John F. Kennedy 35th president of the United States Funko Style

For best results and minimal layer lines, use a fine layer height (around 0.1–0.12 mm) and slower print speeds to capture small details—particularly in the face and hair. PLA or PETG both work well; PLA is often easier for beginners.…

4th & 5th Gen. 4Runner Rear Dashcam Mount

I bought a 2-channel dashcam for my 4runner and I was left feeling that the methods for mounting the rear camera were wanton. as such, I created this attachment for the rear camera that places it very near the glass and exactly in the…

Catan Player Piece Holder for 5th Edition

Only change is width of the space for City pieces. Mine did not fit in the original model and one of the other remix's was too big. My city pieces measured just over 10mm wide (~10.1mm) and this fits them perfectly now.

Ram 1500 (5th gen) dashboard mount / arm

This mount plugs into the two existing screws at the top of the Ram 1500 dashboard (5th gen, 2019-2014). The top part is intended to mate with a rear-view camera (I use it for the camera on the back of my RV). Note that in practice the…

Prairie Schooner - Fixed F. Axle - Pioneer Covered Wagon (without the bonnet) ~1/15th Scale

UPDATE: I made a version 2 of this design with a pivoting front axle, and a few other changes. It's a lot more fun to play with. :D ----- I needed a covered wagon for an object lesson, and didn't want to decorate a shoebox, as one source…

Toyota 4Runner 5th Gen - 6.5" rear hatch speaker adapter

Adapter for 5th gen 4runner 6 1/2 in speakers for back hatch. It fits into a 2011 4runner but I imagine it should fit any 5th gen as well as other speakers as long as they're the same size. Print in PETG or ABS or similar high temp…

5th Gen 4Runner Genie Garage Door Opener Mount

The clip that was included with my garage door opener did not fit well anywhere in my 4Runner. I combined a clip with a blank switch plug to create a custom mount that integrates well. I replaced the blank to the lower left of the…

IPAD 5th GEN CASE/HOLDER

Hello! Here is my design for an IPAD 5th gen case with soft inserts! Theses are a bit smaller in order to be easier to insert. Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2 Rafts: No Supports: Yes Resolution: 0.2…

Yu-Gi-Oh 25th Anniversary Tin Card Organizer

Printable card organizer and dividers for the collectable Yu-Go-Oh! 25th anniversary tins. Fits snugly without being too tight to remove from the tin if desired. Dividers can be placed in channels to get various section sizes. Cards are…

RODE NT1 5th gen mount ring for SMR shock mount

I used an NT1 for years, but since I use multiple computers I wanted audio to input to any of them without worrying about analog mixing and relying on the quality of whatever sound hardware might be in a random machine. The USB-C…

Simple iPod Case (Thick or Thin 5th, 6th, 7th, Gen Classic, Video)

3D model description Frame for Thin or Thick Model iPod models from 2005-2013 (5th 5.5 6th &7th Gen) included. YOU WILL NEED: 4x M3x16 or M3x17mm Screws (Thin) 4x M3x19mm or M3x20mm Screws (Thick) 4xm3 Nuts (acorn nuts give a finished…

HSW iPad Mini (4-5th Gen) Holder

After a quick look, I realized there wasn't an iPad Mini holder available for HSW, so I decided to create one. The attachment mechanism for the HSW is inspired by an idea from KYD Design. A big shoutout to KYD Design for their fantastic…

Machi Koro (5th Anniversary Edition) Sleeved Insert

This is a quick insert for Machi Koro, 5th Anniversary Edition. It supports sleeved cards and can also be used during gameplay. Starting cards and dice are in the bottom tray. The other two card trays and the coin tray can be set out on…

Deeper sides / 5th Gen 4Runner Sunglass/Coin holder V4

This is a deeper model that I just made. It has a slanted floor to hold your glasses to the rear. You can put your glasses or coins in here to keep them in place. The side with more depth goes towards the shifter. I put a thin piece of…

Wall mount for Amazon Fire Tab 7" 5th gen "KFFOWI"

A wall mount for the 5th gen Amazon Fire Tab 7" with cable routing for a 90° angled charging cable exiting to the left. I use the tablet in kiosk mode for displaying the home assistant dashboard. I designed it to fit the “AINOPE” cable…

Buck Rogers in the 25th Century - The Searcher - 1979-1981

Buck Rogers in the 25th Century - The Searcher - 1979-1981 3D printable model.

5th Gen Subaru Outback Legacy Speaker Spacer Adapter 2015 2016 2017 2018 2019

!!! DO NOT EVER, EVER, EVER! PRINT CAR PARTS WITH PLA !!! PLA WILL reach glassing temperatures on hot sunny days, no matter WHERE in the car the part goes. PETG, ABS, or other similar higher-temp filament is REQUIRED With that safety…

5th Gen 4Runner Sunglass/Coin holder

I needed a quick place to put my Sun Glasses on the console, but the 5th does not have one. So I made this. Nothing fancy, but does the job. You can put your glasses or coins in here to keep them in place. The side with more depth goes…

Tiny Toyota 4Runner 5th Gen - Mini Cars Series

Toyota 4Runner 5th Gen, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for…

Kwikpen 5th dose plunger, easy mode without break in half the pen

With this model you can use the last dose (5th) of kwikpen of most brands. It's intended to use without break the pen in half, because this is difficult to do, only you need to remove the dial and insert the plunger. Due abuse in the past…

Dual 1/64 Gran Turismo 25th Anniversary Theme Display

Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…

Owala FreeSip 24oz adapter for 5th gen Honda Odyssey (2018)

The 24oz Owala FreeSip claims compatibility with “most” cupholders; my van apparently doesn't fit the definition of “most”. If you also have a 2018 (or possibly any 5th gen) Honda Odyssey and don't want to just put your FreeSip in…

iPod 5th Gen THICC-BOI 80gb 60gb 5.5

Remix from the “Slim” model to fit the THICCer iPods with bigger HDDs.

5th gen Camaro shift knob

First replacement shift knob for my 2014 Chevy Camaro. Will work for years 2014-2015; I believe will also work as far back as 2010, but Haven't tried it. Have a look at the print settings and material.

US Army's 25th Infantry Division Patch

The g-code was sliced for 2 color changes (Red, then Yellow). Model was also scaled down to 75%. Prusaslicer’s default .2mm quality setting with 15% infill. STL file included and 3mf included.

iPod Classic 5th generation backpack for 1Mii bluetooth transmitter

This is a little case I put together to give my iPod Classic 5th generation (iPod 5g/iPod video) a backpack to hold a 1Mii bluetooth transmitter/receiver, instead of just letting it dangle around and potentially get damaged or damage the…

Roku Premier + (5th Gen) Wall Mount

I designed this as a wall mount for a Roku Premier+, but I ended up just using a 3M strip to mount it to the back of my TV. Either way, it works! Thanks Roku, for making a device that doesn't require line of sight for remote control.…

Yaesu FTM-300DR Head unit mount for 5th Gen (2015-2017) Subaru Outback center console

All files including design files are on my github (https://github.com/gx1400/3dprint_subaruoutback_consolemount) Be sure to print in PETG to be more temperature tolerant # Changelog 2022-12-13 - Initial Commit ## Design Autocad Fusion 360…

Hubble Space Telescope 25th Anniversary Model

Hubble Space Telescope 25th Anniversary Model On April 25, 1990, astronauts aboard the Space Shuttle Discovery deployed the Hubble Space Telescope into Earth orbit, and launched a new era of astronomical discovery. Now, 25 years later, we…

Doctor Who 15th Sonic Screwdriver Stand

Doctor Who 15th Sonic Screwdriver Stand

Shadow of the Colossus - 15th Colossus Argus

I did not create this model. I just ripped them from the PS2 version and posed them.

Machi Koro Compact Organizer/Travel Box for 5th Anniversary Edition

I recently bought the 5th anniversary edition of Machi Koro. Great game but it comes in an insanely large box, with a stupid number of plastic coins. There are a few organizers on Thingiverse but none seemed to be able to hold my sleeved…

Toyota 4Runner 5th Gen - Kenwood Microphone Mount for Overhead Console

Microphone mount for 5th Gen 4Runner: -Replaces OEM microphone in overhead console -Designed to fit Kenwood aftermarket microphone such as p/n ZYW3967-339 The mk8 file is the latest version, and the microphone passes through the bottom…

DECRYPTO 5th ANNIVERSARY + LASERDISC - INSERT, EINSATZ, INLAY, ORGANIZER

English description (deutsch darunter): The insert consists of many practical parts to store all the game material. It also helps with the assembly and speeds up the dismantling of the game. There are also 4 feet included, which replace…

5th Element Mondoshawan Spaceship w/stand

This is a rough scan of the original Mondoshawan Ship from the 5th Element Movie. Requires supports. Stand included. Based on the real prop! Prints with supports shown below, but they come off very easy. Powered by Image-to-3D from…

Silverhochzeit / 25th Anniversary Decoration

Simply just stick everything together. Depending on your printers tolerances, you may need to add a bit of glue, but it should be all friction fit. There is a groove in the center to put a gift card between the 25 and the heart

Erin Gray as Wilma Deering 01 "Buck Rogers in the 25th Century" (1979)

IMDB says Buck Rogers was a superhero.

Trophy-Holding Bot Boi - 1st 2nd 3rd 4th 5th

A small sculpture of a robot. Includes 1st through 5th place trophies that slot into the robot's hand.

Alexa Echo Dot 4th and 5th Generation Thing Stand

A stand designed for the Alexa Echo Dot (4th and 5th generation). This model is a remix based on a hand sculpture originally published on Thingiverse. Printed with PLA 5% Infill No Support

4Runner 5th Gen Center Console Box Lid Molle or Hex Panel

Perfectly modeled to replace the tissue box holder in the lid of the 5th generation 4Runner center console. To remove the existing tissue holder: Release the bottom tabs from the tissue box holder using a pry tool (or really your hands…

Nuki Smart Lock PRO (5th Gen) CH-Zylinder (Knob)

Prepare the Key Adapter The key includes a cavity for an M3 threaded insert, allowing you to secure it with a set screw. Install Threaded Inserts into the Base The printed base has two holes designed for M4 threaded inserts. These provide…

Prairie Schooner - Pivoting F. Axle - Pioneer Covered Wagon, ~1/15th Scale

The Version 1 of this Prairie Schooner covered wagon (without the bonnet) has a fixed front axle, which is fine for displays, but not as fun to play with. This Version 2 has a pivoting front axle attached to the tongue (with a…

5th Element Mondoshawan Head for AMS/MMU

This is a rough scan of the original Mondoshawan Head from the 5th Element Movie. Requires supports. Stand included. Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d) Ship Here:…

5th gen Toyota 4runner keychange

this is a car model for a keychange Enjoy!

Holder for IXO (5th Gen) at KÜPPER pegboard

This is a very simple holder for the BOSCH IXO (5th Gen) at a KÜPPER pegboard. Printing Print in PETG with 0.4 mm nozzle @0.2 mm layer height no suppports needed Additionally needed material: two 4x12 mm woodscrews or chipboardscrews (I…

RAM mount for 5th-Gen 4Runner

It uses M6 hardware for the front plate and fits RAM ball RAP-B-354U-TRA1. I used Cat tongue tape on the bottom, center, and corners to keep it from sliding out,

Visor shade for iPad 5th Gen for use with DJI Mini 2

This is a remix of the tablet visor designed by @idig3D , that has been scaled up to work with an iPad 5th Gen 9.7 inch tablet. There are two complete versions in this remix, there is a short version, which is the same height as the…

makerbot replicator 5th belt clip

The original wouldn't hold the belt tight and wouldn't stay on the carriage. Deceased the gap for the belt to slide in. Made the walls wider so it wouldn't flex. Now the belt slides in tight and doesn't pull out. Made the clips to hold…

6x9 speaker adapter for 5th gen subaru outback and legacy

Will need to be glued together, I suggest 2 part epoxy. Screw holes are 6mm, meant to be used with 5mm heat set inserts. Fits Audiofrog gs690 As with anything printed to go in a car, use petg or better. Feel free to modify to fit your needs

Echo dot holder stand (4th or 5th gen)

I use this stand for the echo dot in my kitchen to keep the device away from food and other mess. I hope you enjoy the model. Let me know what you think!

Gundam Barbatos 5th Form Parts

In the folders, you will find parts for the Schwalbe Graze skirts and the Barbatos 4th form sword. These parts are used to convert the barbatos into its 5th form. All of those parts are replacements for parts that came in the "Bandai…

Banjo Capo for 5th string

The main part and the knob should be printed using PLA. The TPU string insert has two options a thicker and thinner one to choose which is more comfortable. It gets in the way slightly but its a way to capo without having to drill holes…

iPod Classic 5th Gen Slide-In Clip Case (TPU Stop Disc)

Summary Slide-in clip case for the iPod Classic 5th/5.5th gen (thin). No screws, no disassembly. A 20 mm TPU disc sits in the base as a soft stop to add friction so the iPod doesn’t creep out—but the case also works without the disc if…

Amazon Kindle Fire 7" Stand with Integrated Cable (2015 aka 5th)

Back in 2015 I've bought Amazon Kindle Fire 7" (aka 5th) for my grandmother. Unfortunately we had number of issues which I've tried to solve with this stand design. List of the issues: microUSB orientation being confusing at the times,…

5th Anniversary Jubilee Birthday Universal Trophy Cup

Multi usable universal trophy for 5th “anything”: Birthday, Anniversary, Jubilee, Game Night or what ever. Cups for other YEAR numbers can be found here . You can add further text via your slicer. Made for multicolor print. Enjoy!…