Counting matching models…
Housing for CVBS/AHD camera of Mercedes Benz license plate lamp. You can use this adapter / fixture for camera, which comes with android auto headunits, as replacement of original transparent plastic in licence plate light or combine it…
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for PETGSource material: PET
This model is a replacement for the reverse/brake side of the trigger on the FlySky Noble NB4/NB4+ radio. I accidentally broke the Medium size, and then the Small size broke on me unexpectedly. There is definitely a weak spot in the…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
========================================================== UPDATE: I have released an improved version v3 which can be found here ========================================================== I saw the model from xoid but the zipper I needed…
This is the standing version of the spool holder, I have already uploaded a hanging version , some parts are the same as the other spool holder so you can reuse them if you change your setup. Introduction: After some experience with my…
this model is not the design file by anycubic, it is reverse engineered, so slight dimensional differences may occure. reference this model with caution. do not print this. this is not meant to be a printable file
This angled adapter allows for a very clean connection of a reverse bowden filament feeder to your MK3S printer (such as from a dry box). The adapter allows mounting two PC4-M10 fittings (M10x0.9 thread), to connect the extruder end to…
This is a reverse alignment tool for Co2 laser machines from Omtech. I upload this upon request, but I really encourage that if you can afford to, that you purchase the “real” tool from American Photonics, it even comes calibrated! Please…
I took the mounting part of the filament sensor mount as inspiration and I made a wider clip with a UBBI connection at a 45 degree angle. There is also a hole for sticking filament that you aren't using (like a filament clip). I hung my…
Gridfinity holder for FastCap ProCarpenter True32 Metric Reverse Measuring Tape. I think this may fit other fastcap tape measures in the ProCarpenter series but I only have the metric one so I cannot confirm that. Full product description…
For more containers go to: https://www.printables.com/model/641022-universal-rugged-knurling-pattern-cylindrical-cont https://www.printables.com/model/593473-screw-top-lid-rugged-cylindrical-container…
I made this reverse Bowden mount for my BLV mgn Cube, but it will attach to any 2020 extrusion with M3 screws and T-nuts. It's 8mm thick, so that you can screw in standard PC4-M6 fittings on top and bottom, and plug in my filament runout…
If you want to support my work, buy me a coffee RatRig V-Minion reverse Bowden w/PC04-M8 by dragonfly BMO 2 cap head M6x12 2 T-Nut - Drop In for 3030 - M6 1 Bowden adaptor by Phaetus dragonfly BMO
Print Settings Rafts: No Supports: yes but not on the threading. Resolution: 0.15mm Infill: 15% Filament: Prusament Simply Green PLA Other: This simple part can be used as a reverse bowden setup that works well with filament dry boxes as…
this model is not the design file by anycubic, it is reverse engineered, so slight dimensional differences may occure. reference this model with caution. do not print this. this is not meant to be a printable file
The Reverse Trike is a complete re-engineering of the popular Tarmo5 RC Car from ( Engineering Nonsense ) who allowed remix culture of his model . A big thanks to him! While it retains the front steering assembly of the original model,…
this model is not the design file by anycubic, it is reverse engineered, so slight dimensional differences may occure. reference this model with caution. do not print this. this is not meant to be a printable file
Spatula for Clay Modeling - High Precision Reverse Engineering Esta es una réplica exacta de una herramienta profesional de modelado orgánico, diseñada originalmente para escultura en arcilla y modelado de cera. El modelo fue generado…
a simple passthrough for your reverse bowden into a lack enclosure. Drill a 10mm hole and glue it in at the top. The PTFE tube should be a friction fit if your printer makes holes to size.
After seeing the original I wanted to make it more personal. It isn't derived from the original, I made it from from scratch. The inner diameter is 21mm, the outer is 27 mm. When I will learn to use SCAD I will post a customizable…
The original model had too small thread for the fitting, this model fixes that
⚠ Be aware this model has not been printed and tested as complete part yet. ⚠ I reverse-engineered the Delonghi ECP front panel as best and close to the original as i could. The original intention was to then modify it for mounting a…
Print in any filament no supports slowly and have maximum cooling
Someone in the Virtual Boy Fans Unite group on facebook said his lenses were cracked. I didnt have any extras to send, so within an hour I'd removed the best original lens I had from one of my two working Virtual Boys, and I reverse…
Spool Holder To Reverse Bowden Setup Author: https://www.printables.com/model/1028314-spool-holder-to-reverse-bowden-setup THIS IS THE ORIGINAL MODEL, NEXT WILL BE MY REMIX I also used the author's original photographs. Description of my…
When installing the reverse osmosis unit you will need to screw on the faucet nuts, and that will be tricky because you can't screw the nuts on with a normal wrench because of limited space, so I designed the wrench/knob.
The bulb hanger is backwards and works in the opposite direction than I want/need - so I designed a cap to super glue to the top of it. Because these hangers are one direction, they can only be run from right to left, not left to right.…
nerf rachet blast cylinder untested
A precision-engineered replacement component for a fishing reel, created via reverse engineering from a damaged original part. Modeled with optimized mechanical tolerances for 3D printing functional repairs. 🚨 NEED A REPLACEMENT PART OR…
We both know the discs in the box are getting lost in the house, now you can have even more of them lost in the house, and in different colors! Haha! They fly fast and true, maybe even better than the originals. Can easily be printed in…
Gridfinity holder for FastCap ProCarpenter True32 Metric Reverse Measuring Tape. I think this may fit other fastcap tape measures in the ProCarpenter series but I only have the metric one so I cannot confirm that. Full product description…
This adaptor replaces the 8*7.5mm PTFE tube clamped into Prusa's Filament Guide Addon for the standard Prusa Spool Holder. It provides a square tapered hole that 4mm PTFE tube can be pressed into for a Reverse Bowden setup. The PTFE tube…
I had to change out the original reverse camera in my WRX as it did not work with the new Head Unit. I purchased a Natika Backup camera from Amazon, which works well, but the method of installation did not suit me, I did not want to put a…
I took the mounting part of the filament sensor mount as inspiration and I made a wider clip with a UBBI connection at a 45 degree angle. There is also a hole for sticking filament that you aren't using (like a filament clip). I hung my…
Requirements: You will need two 25mm M4 screws for installation. I bought the Bowden parts on Amazon as a kit: https://www.amazon.com/gp/product/B0CMQN1681/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 This remix of the Elegoo Neptune 4…
The original model had too small thread for the fitting, this model fixes that
About I've got two Adafruit ESP32-S3 Reverse TFT Feather and without any enclosure or stand it is a bit inconvenient to use them, especially if you have a lot of other tools on the messy table :D Thus I mixed gridfinity bin 1x2x2 from the…
It's a bit jenk looking, as I barely know how to modify an STL, but I did what I could and it should be functional. I mostly hope that the original creator will share the original 3D files or make these new and improved versions…
========================================================== UPDATE: I have released an improved version v3 which can be found here ========================================================== I saw the model from xoid but the zipper I needed…
PTFE filament guide for 4mm exterior x 2mm interior tube. Hole for a 10mm Male Thread Joint Air Pneumatic Connector Quick Fitting This is the guide for a reverse Bowden setup on my BLV MGN Category: 3D Printer Accessories
Z-Axis Top Mount: Longer version to use on the left side with the servo attached. Extruder Cover: Optimized to use with 4mm OD, 2.5mm ID PTFE tube.
========================================================== UPDATE: I have released an improved version v3 which can be found here ========================================================== 3D printable replacement parts for a reverse bale…
Somewhere in the multiverse there is a place where they decorate giant ornaments with little trees. AMS painted 3mf. Tree Supports on build plate only Created in Tinkercad.
u need longer cables than stock, stock psu cable wont be long enough dont forget to scale model, printed mine in PC bottom panel with fan mount also available I do not consent to the sale of this model or any of its remixes in digital or…
This a quick remix of the official Prusa filament Guide to change the guide holes to be threaded for PC4-M10 connectors for a Reverse Bowden set-up. I also simplified the ends of the arms and removed the R1 text.
Have you ever put a full spool on your MK4/MK3.9 filament holder, and have it come unwound during a side to side print? The left right motion of the print head yanks on the print spool and can make it over-run. Even with brakes on your…
After making a stand for regular tweezers, someone commented that it was not suitable for reverse tweezers. Therefore decided to upload the design I made for my set of reverse tweezers and hope this is will be appropriate for other…
This a Remix of the Reversed Einsey case linked. I have modified pretty much all the parts with the exception of the Hinge Mounts from the original. I improved the air flow through the electronics case and changed the Lettering around on…
Keep that pecker under lock and key! A two piece ring fits behind the scrotum. The lower part of the ring is curved backwards. Two pins on the front cage lock the ring pieces together. Once the front cage slides into place, it is all held…
Same as the original, but with the header soldered on the other side
When installing the reverse osmosis unit you will need to screw on the faucet nuts, and that will be tricky because you can't screw the nuts on with a normal wrench because of limited space, so I designed the wrench/knob.
The pastic collar that engages with the reverse lockout cable in a mk2 Ford Sierra 4x4.
This is a minimalist remix from bonticus design. For CZSP01 magazines. (with a snug fit) I will post a CZP10 version later. Printed this in Petg in the correct orientation for strengh (see original model) I used 3D honycomb infill with 3…
Hyundai Getz reverse camera mount This print is designed for the rear modification of a Hyundai Getz 2003 1.3, but it should fit most other Getz models, i believe the back door hasn’t changed much over the years. Printing Notes: PLA works…
Aside from reinforcing the clamp, the magazines now point in opposite directions. This is to allow for reload by spinning the pair, and based on how you setup your pair the spare magazine will always be on the left or right side (your…
Needed materials: 3x BLUM 9350743 CLIP top BLUMOTION hinge 3x BLUM Clip mounting plate 6x or 12x SPAX or equivalent 5x60mm counter-sunk wood screws 6x ~3x16 counter-sunk to mount the hinge plate 2x 5mm wide screws for temporary drilling…
I modified the original plate design, to delete the 7th and reverse gear when not needed. You just have to unscrew the top cover of the Simsonn HS-Pro to change the plate. Link to the product page:…
All Artillery Sidewinder printers use the same filament sensor. With the adaptor you can find here (also check my remarks on the other project my adaptor has been inspired by for additional parts) after adding two M6 pigtails / inserts…
Useful for those unfamiliar with tying knots or when hands are numb and uncooperative.
⚠ Be aware this model has not been printed and tested as complete part yet. ⚠ I reverse-engineered the Delonghi ECP front panel as best and close to the original as i could. The original intention was to then modify it for mounting a…
Just a reversed set of teeth for https://www.printables.com/model/633650-vise-miniature-holder-for-painting
The handle on our sink's drinking water faucet snapped off, so I whipped up this little model to take its place! This one was made specifically for the faucet that comes with the Apex reverse osmosis systems, but it may work on other…
This model is a replacement for the reverse/brake side of the trigger on the FlySky Noble NB4/NB4+ radio. I accidentally broke the Medium size, and then the Small size broke on me unexpectedly. There is definitely a weak spot in the…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
Light fits below the existing end light, kept in place using the bolt that holds the end light glass. Printing: Print the casing with back side on the plate. It has integrated support that easily removes after print. Print the glass also…
Dual Outlet For Spool Holder To Reverse Bowden
This model utilizes the MMU floor mount designed by @MIRE ( Collection of mods for coreboxx premium) V2 is ready and I'm much happier with it. It raises the MMU 30mm over the V1 to give the out PTFE a better angle to the slot in the…
Spatula for Clay Modeling - High Precision Reverse Engineering Esta es una réplica exacta de una herramienta profesional de modelado orgánico, diseñada originalmente para escultura en arcilla y modelado de cera. El modelo fue generado…
It's silly that so many of the models for these are paywalled. You shouldn't need to pay for a tube with a nut inside. I used a cheap $3 open end acorn lug from lordco. I think it is a 21mm but if you put the acorn side in first it should…
I couldn't find a 3d printed lever for AGFAPHOTO film camera, so when the plastic lever broke i designed my own version to regain its functionality. PTCG is very advisable as it likely wont break. The .3mf file contains for translucent…
Miniature reverse vending machine that detects, color-sorts bottles and prints receipts.
Changed to Reverse P and also changed to single volume, no tone control. Changed the split location to hide better. If you use this pickguard you'll need to route the body for the new pickup location for the D and G strings. Best way to…
Moved the heatset inserts to the other side to be less likely to pull out.
At my workspace I use all spraycans through their long pointy nozzles. Since some designs have changed, I didnt like them occasionly falling out of position when using them. This is my quick workaround for my personal preferenzes and…
Print: 1x 3 Pneumatic Points 2x 2 Pneumatic Points Fit (carefully glue) the pieces like so: Any filament pushed through one of the four openings will exit the single endpoint through an attached Bowden tube. Using this you can hide/move…
Made a filament sensor bracket so I can use my dryer box with the printer using M10 fitting. Added Supports arms to keep runout sensor in align. solve problem sensor would easily twist and turn and put filament in a bind. Print…
This pendant is reminiscent of a Helix Nebula. My model was printed using Fillamentum extrafill PLA Lilac at 0.1 layer height on a MK3+s. I suggest reducing printing speed by at least 10%, somewhere between 85 and 90.
I made this for my Kobra 2 Max, although it'd work with any printer that uses the same style of runout sensor. I hated the position of the spool holder on the Kobra 2 Max. A few times the filament broke on me because of how everything is…
Introducing the Ultimate Reverse Camera Mount for Jeep Wrangler JKU! Tired of struggling with blind spots when reversing your Jeep Wrangler JKU? Look no further than this innovative, 3D-printed reverse camera mount, designed specifically…
Simple model of reverse bowden bottom support for 4mm PTFE tube. Build instructions : I build it from PETG-PTFE 10% - becouse I have it and it is black so it fits to sprite extruder well. I build standing as will be used on extruder and…
This is a remix of the R4 buffer MMU version by Filmmax. I have it mounted facing forward so I wanted the numbers to go from left to right instead of right to left. This upload only includes the faceplate and the numbers, you'll need to…
The remix is based on and thus all design credit for the original of AllTheHobbies' Filament Guide . I made the front gap wider so a PTFE tube can pass and use it for a Reverse Bowder setup to feed filament through from a dry/storage box…
Clips for IKEA SÄTTNING cable management box with lid made to use two boxes in order to make one larger box that fits large routers + extension cord + cables and so on. SÄTTING cable management box with lid - IKEA clips are made to use…
EN: The adapter can be used to rotate the feed direction by 180 degrees. Each arm can be extended up to approx. 8 cm. The following arameters were used for printing: - PETG (silver satin, iron gray) - 0.4 mm nozzle - layer height 0,2 mm -…
Extrusion Reverse Bracket 20x20 top rail is going to be used for another project i am working on. modify to fit your needs. 15% infill
Ready for Halloween? Try these 5 beautiful gravestones, to add a touch of joy to your dining table and your home! 😁 The gravestones are reverse printed (the main face is placed on the plate) for greater quality. No support required.…
I've tried a lot of BCAR and PCARs for the HC Diana and felt it makes only marginal difference when it comes to accuracy at a huge FPS lost. I prefer to have the higher FPS. I'm using the after market barrel that has a reverse thread on…
In my opinion it is better if the resistance is lower when counting up than when counting down. Therefore I rotated the internal mechanism 180 degrees. Counting up now feels smoother.
Noticed that the soldering reverse tweezers I had looked a lot like these, but came in a set of 3. Modified the storage tray to include a post for the third tweezer. These are the tweezer set I have: https://www.amazon.com/dp/B073SJD7L5…
A link for the coupler blocks and mmu board mount. https://github.com/Tyler8299/CottonTail-Lite
UBBI adapter to enable reverse bowden capability on stock neptune 4 shroud Features: - Thickened to add more rigidity - Twist locking mechanism with audible snap - Prevents filament tugging and uneven extrusion 🤩 Do you like the design?…
This adaptor replaces the 8*7.5mm PTFE tube clamped into Prusa's Filament Guide Addon for the standard Prusa Spool Holder. It provides a square tapered hole that 4mm PTFE tube can be pressed into for a Reverse Bowden setup. The PTFE tube…
you need: 1_ m3x16 1_ pc4-m10 print settings: infill: 25% or more You can print it in pla, but abs or petg is more durable
This print cost me 0.48 and saved me about $59.00 which the USED one on eBay was listed for! A used one would be just as brittle as it would just as old as mine (unless it was new old stock which I could not find). I did make a minor…
