1 / 3
CH Products Pro Throttle 50% detent - forward backward throttle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
CH Products Pro Throttle 50% detent - forward backward throttle
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 22
- Makes
- 0
- Views
- 166
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
Add a detent to you CH Products Pro Throttle to turn it into a forward backward throttle.
There are 2 versions with different stiffness, pick one depending on the filament used and resistance you want. I printed mine in PETG, TPU 95A was too soft.
No supports needed.
Installation
- To install turn the throttle upside down and remove the 4 rubber feet with a flat head screw driver or similar (they are glued on with sticky tape).
- Unscrew the 4 screws under the feet with a phillips screw driver.
- Unscrew the middle screw that holds the throttle plat in place with a phillips screw driver.
- Place the new printed part as per the image and screw back in using the same screw that was removed in step 3.
- Close everything back up.
- Stick the rubber feet back on.
