Trunion Mount with Detents
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A trunion mount that provides +-25 degree or +- 50 degree detented tilting. Overall width is 87mm.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 18
- Makes
- 0
- Views
- 113
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Two simple parts to print. Print the one with bosses orientated as shown in the photo. You will need a 8-32 x 2" SHCS, an 8-32 thin, self-locking nut, a pair of 5mm diameter balls preferably steel or stainless steel, a pair of .187" OD x .50" long compression springs with F&G ends and a pair of M8-1.25 set screws. Note the model of the part with the bosses does not include the M8-1.25 threads. The required .267" bore is provided for tapping with a bottoming, chip removal tap. I would make the threads thus but if you want to try your hand at modeling the thread in the part that's a great learning exercise. Either way, enjoy…