Jillian's Rose Fixed (Made Solid With MeshMixer)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I found some problems with ''Jillian's Rose'' and some slicers couldn't handle it. I used MeshMixer to make it solid,…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 363
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
I found some problems with ''Jillian's Rose'' and some slicers couldn't handle it. I used MeshMixer to make it solid, make all walls at least 1.0 mm and remeshed it all because it had a high poly count after those MM tools.
I also found a file I fixed some time ago with other software, it only has thicker walls but is also solid and without defects (Rose_PetalThickerWalls.stl). Try to print them as you prefer, I think slicers shouldn't have trouble with these files.
The original is here where also the leaves are that go with the flower: http://www.thingiverse.com/thing:26417