Sega AV MOD Box - Simple Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A box to hold my RCA sockets with a hole for the connector
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 216
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
I have a Sega Master System 2 and wanted to do the AV Mod but didn't want to drill holes in the original case so I ran a lead out the back though the RF hole for the RCA sockets, with a 3 PIN quick connector so I could easy remove the box (The Master System 2 only has mono audio, hence it only requires 3 output wires. Video, Audio and Ground)
So now the console “looks” untouched, but I can use the RF feed or the AV feed
The actual mod is in the console as there is space, but I could have placed it in this box too
Print writing side down on a textured sheet for the best result (I forgot to change my sheet before I printed it)
I have uploaded the .3mf file, incase you need to adjust the size of any of the holes (all added as negative volume), the RCA holes are 6.1mm (check your sockets before printing) and the input hole is 3.5mm which was perfect for my 3 cables
Height - 0.20mm
Brim - Up to you
Supports - Not required