DJI Wireless Mic case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case (enclosure) for the DJI wireless mic Recorder/Transmitter.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 432
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
I created this case to better hide the DJI mic recorder on the bride during a wedding shoot. I slid through some stretchy white material on either side so I cound mount it under the dress to completely hide it but with some dresses are still revealing due to the ruffles on the dress. Printed in White, you can print in TPU as I did or PLA but the PLA will be more rigid and less comfortable for a long shoot.
You can also print in any color to coincide with any color garment.
Image shows it printed without supports. For ultimate results I recommend printing with a dual extruder setup, Supports being printed in PLA at 220-225 degrees and TPU for the case itself printed at 235 degrees. The supports will be easier to remove and almost no pattern present on the case.
Print with an X axis of 52.7 MM for correct size